d65 2 degrees vs d65 10 degrees - Home Theater Forum and Systems - HomeTheaterShack.com

 
Thread Tools
post #1 of 9 Old 10-08-07, 07:13 PM Thread Starter
Shackster
Gbr
 
Join Date: Sep 2007
Location: Fort Myers
Posts: 85
d65 2 degrees vs d65 10 degrees

ok this caught my eye at the other place because someone was still touting behr silver screen and every time i look at that paint it looks both slightly lilac and slightly baby blue to me.

it was stated over at the other venue that behr measured silver screen to be a neutral gray at 205 206 205 but the one thing that jumped out at me was that these measurements were taken at d65 10 degrees.

everything i have seen thus far in the way of referencing neutral gray resulted in RGB measurements being taken at d65 2 degrees so what bearing does this variation have because the silver screen stated measurements posted here sure seem to provide an indication of what i'm seeing (weak green, stronger red, much stronger blue)
GbrNole is offline  
Sponsored Links
Advertisement
 
post #2 of 9 Old 10-08-07, 08:43 PM
Elite Shackster
 
mechman's Avatar
Steve Mechelke -mech
 
Join Date: Feb 2007
Location: Empire Township, MN
Posts: 14,914
My System
Re: d65 2 degrees vs d65 10 degrees

I wiki'd it!

Quote:
The CIE 1964 Standard Observer color matching functions are defined for a 10 degree field of view. They were derived from the work of Stiles and Burch (1959), and Speranskaya (1959). The 1931 standard observer field of view was 2 degrees which covers only the fovea. For the 10 degree experiments, the observers were instructed to ignore the central 2-degree spot. The 1964 supplementary standard observer is recommended for more than about a 4 degree field of view.
What's a fovea?

Quote:
The fovea, also known as the fovea centralis, is a part of the eye, located in the center of the macula region of the retina. [1] [2] The fovea is responsible for sharp central vision, which is necessary in humans for reading, watching television or movies, driving, and any activity where visual detail is of primary importance.
Watching TV and movies... 2 degrees must be good enough, eh?

From a chart here on white points, you can see that the difference between 2 degree and 10 degree is about .001- .002 or so.

Bill will pipe in shortly and probably more in depth!

mech


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
mechman is offline  
post #3 of 9 Old 10-08-07, 08:51 PM
Elite Shackster
 
wbassett's Avatar
Bill
 
Join Date: Feb 2007
Location: Central PA
Posts: 2,234
Re: d65 2 degrees vs d65 10 degrees

Not much to add... it covers a 10degree area while the other only a 2 degree area. More is sampled so you get a bigger section. PocketSpec uses 45 degrees, but they are selling colorimeters and not full spectrophotometers.

Quote:
gbrnole wrote:
one question i have is that the behr readings were all done at d65 10 degrees while every other neutral reading of gray that i have seen was taken at d65 2 degrees -what is the difference between the two readings especially given that i have seen alternate values for silver screen that seem to more closely represent what i'm looking at (207 202 215)?
The 207 202 215 value was converted using C. If you took the graph and could 'cut' the C reference point and where 207 202 215 falls in respect to it, and could overlay it ontop of the D65 neutral reference point, you'd see the two values match up or be so close nobody would argue any difference.

"Make everything as simple as possible, but no simpler." - Albert Einstein

"If all else fails, spin the cat."- Grzboken
wbassett is offline  
post #4 of 9 Old 10-08-07, 09:25 PM
Shackster
 
<^..^>Smokey Joe's Avatar
<^..^>SJ
 
Join Date: Jun 2007
Location: New Zealand
Posts: 92
Re: d65 2 degrees vs d65 10 degrees

Calibration is typically based upon the 2 degree CIE1931 xy coord system.

It may seem old, but our eyes haven't changed and short of new discoveries in the way we see or perceive this reference probably wont change much.
In the CIE chart D65 is a point x.313,y.329 and it can be black all the to white as this point actually has a 3rd dimension to it. They all (should) equal x0.313,y0.329

D6500 as an iluminate is like an overcast sky, or viewing from under a shady tree.
Measuring a reflective colour is hard without an accurate D6500 illuminance that creates the full spectrum of light as we see it.

Our eyes are better at seeing illuminance as we have billions of rods, where the colour function we have only millions of cones, and these are arranged to see straight ahead, hence the central narrow angle of illuminance and colour accuracy. As the angle widens our colour interpretation changes as does our sensitivity to such artifacts as flicker which is a function of our 22 cycles per second eye/brain resolution.



Ive just finished reading 'Intangle Minds' and now Im not sure about reality anymore in that none of this could be real. Quantum mechanics...if it doesn't scare you, you don't get it.

back to work now....bad boy...

Light changes what it is doing depending if we are looking or not. Considering we only see this as a reflection of the past....what is it really doing now?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
<^..^>Smokey Joe is offline  
post #5 of 9 Old 10-08-07, 09:28 PM
Elite Shackster
 
wbassett's Avatar
Bill
 
Join Date: Feb 2007
Location: Central PA
Posts: 2,234
Re: d65 2 degrees vs d65 10 degrees

Gbr here is also something that hopefully will help with all of the neutral discussions.

"Make everything as simple as possible, but no simpler." - Albert Einstein

"If all else fails, spin the cat."- Grzboken
wbassett is offline  
post #6 of 9 Old 10-08-07, 09:44 PM
Elite Shackster
 
wbassett's Avatar
Bill
 
Join Date: Feb 2007
Location: Central PA
Posts: 2,234
Re: d65 2 degrees vs d65 10 degrees

Quote:
<^..^>Smokey Joe wrote: View Post
Measuring a reflective colour is hard without an accurate D6500 iluminance that creates the full spectrum of light as we see it...
Thanks for answering up Smokey

Also this is why spectrophotometers are such an expensive and precise piece of equipment. They also require routine calibration testing and recertification from an authorized and certified facility. They may remain accurate well after the calibration date expires same as a car will certainly still run after the inspection expires, but unlike the car that only needs to get us from point A to point B and it doesn't matter how fast (but should as far as how safely), a spectrophotometer can't be guanteed to be within specifications once the calibration is expired. A person could use it for their own personal color space as long as they don't try to reference to other values taken from calibrated units. It could be accurate and the same, or it could be off. To emilinate questions, units are calibrated and recertified on a regular basis.

Now, one thing to mention is there are and will be slight variances between two units but those variances should be very small- so small in fact nobody would contest it as a totally different color. Other variables could be the source being tested.

"Make everything as simple as possible, but no simpler." - Albert Einstein

"If all else fails, spin the cat."- Grzboken
wbassett is offline  
post #7 of 9 Old 10-08-07, 10:44 PM
Elite Shackster
 
mechman's Avatar
Steve Mechelke -mech
 
Join Date: Feb 2007
Location: Empire Township, MN
Posts: 14,914
My System
Re: d65 2 degrees vs d65 10 degrees

Quote:
wbassett wrote: View Post
Also this is why spectrophotometers are such an expensive and precise piece of equipment. They also require routine calibration testing and recertification from an authorized and certified facility. They may remain accurate well after the calibration date expires same as a car will certainly still run after the inspection expires, but unlike the car that only needs to get us from point A to point B and it doesn't matter how fast (but should as far as how safely), a spectrophotometer can't be guanteed to be within specifications once the calibration is expired. A person could use it for their own personal color space as long as they don't try to reference to other values taken from calibrated units. It could be accurate and the same, or it could be off. To emilinate questions, units are calibrated and recertified on a regular basis.
X-Rite recommends yearly factory calibrations.

mech


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
mechman is offline  
post #8 of 9 Old 10-08-07, 11:01 PM
Elite Shackster
 
mechman's Avatar
Steve Mechelke -mech
 
Join Date: Feb 2007
Location: Empire Township, MN
Posts: 14,914
My System
Re: d65 2 degrees vs d65 10 degrees

Quote:
<^..^>Smokey Joe wrote: View Post


Ive just finished reading 'Intangle Minds' and now Im not sure about reality anymore in that none of this could be real. Quantum mechanics...if it doesn't scare you, you don't get it.

back to work now....bad boy...
I'm gonna have to look for that as my current books are all read and stacked...

Good read smoke?

mech


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
mechman is offline  
post #9 of 9 Old 10-08-07, 11:14 PM
Shackster
 
<^..^>Smokey Joe's Avatar
<^..^>SJ
 
Join Date: Jun 2007
Location: New Zealand
Posts: 92
Re: d65 2 degrees vs d65 10 degrees

Oops mis spulled that.

'Intangled Minds'

Interesting read for sure. The chap who wrote this book was part of the PSI experiments like remote viewing and so on. If one is interested in the idea of quantum mechanics and things like effects of 'influence' on the fuzzy world we are part of you will find it interesting. For some the concepts are hard to except.

btw, if you read this book, my sig sentences will make sense. Yes it is true, light does differ in how and when it is received......Einstien' Spooky stuff at a distance'

back to subject matter, our current reality.....

Light changes what it is doing depending if we are looking or not. Considering we only see this as a reflection of the past....what is it really doing now?
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Last edited by <^..^>Smokey Joe; 10-08-07 at 11:22 PM.
<^..^>Smokey Joe is offline  
Reply

Bookmarks

Tags
10 , d65 , degrees

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome