Hi Icaillo, I seem to be having the same problem as Caleb82 in this thread http://www.hometheatershack.com/forums/hitachi/13631-hitachi-61swx10b-convergence-problems.html.
I have the same model TV and I also get the green 5 in the bottom right when trying to run Magic focus.
I have pulled the board out of the TV in preperation of this project. When examining the board I noticed that one of the resistors was touching the other RK58 and RK59. I bent it a little so that they are no longer touching but on RK58 inbetween the 2 middle lines it looks like it may be burned. It is a grey color instead of the normal green.
If thats the case should I just try replacing the resistor in question and see if that works? I hoping this means I dont have to replace the IC's
You the man!
Thanks,
I have the same model TV and I also get the green 5 in the bottom right when trying to run Magic focus.
I have pulled the board out of the TV in preperation of this project. When examining the board I noticed that one of the resistors was touching the other RK58 and RK59. I bent it a little so that they are no longer touching but on RK58 inbetween the 2 middle lines it looks like it may be burned. It is a grey color instead of the normal green.
If thats the case should I just try replacing the resistor in question and see if that works? I hoping this means I dont have to replace the IC's
You the man!
Thanks,