Home Theater Forum and Systems banner

hitachi 43FDX11B RED

2K views 1 reply 2 participants last post by  lcaillo 
#1 ·
A friend gave me this TV which worked fine. I took it outside to blow out the dust and when i got it back in the picture was bad. i found the manual online and went into the convergence adjustment and the red adjustment will only adjust UP and DOWN will not adjust left and right.the blue adjustment is good all directions.
I just found this forum and appears to be the best i've ever found..

THANKS Robert...
 
#2 ·
Your post was moved to the Hitachi forum to maintain forum organization and to make information easier to find. Please review the structure of the forums.

I suggest you read the first ten posts of the convergence repair sticky very carefully:

http://www.hometheatershack.com/for.../5600-crt-based-rptv-convergence-repairs.html

Be sure to pay attention to testing the resistors and get the right parts from a reliable vendor. This is typically a very easy, routine repair if you don't take shortcuts or use cheap substitute parts.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top