Building the Pulse...

**Endesereth** · **09-16-09, 04:31 PM**

Thats is a crazy cabinet! what was the net cost of this project? Also what kind of program are you running?

**Sonnie** · **09-16-09, 05:55 PM**

Hi Derrick and welcome to the Shack

Thanks!

I never have figured up the cost, but I suspect it would be around $800-1000 or so for the driver and materials, unless you could catch a good deal on the drivers, which have been known to surface all along.

The software used to design it is WinISD... we have a Sticky Thread that explains the use of it and where you can download it from.

**Endesereth** · **09-16-09, 08:06 PM**

Thanks...I am trying to build subs and speakers, so I am just looking at what everybody else is doing and gathering some info. I am 16 and I just bought some klipsch XF-48's, so I owe my parents about 1000$'s still, so I can't build anything yet .

**Endesereth** · **09-17-09, 12:15 AM**

I thought about building a sub using an audiopulse driver, but the idea's still fermenting in my head.

Very nice enclosure, must have taken a long time to build and cut. How much cubic feet of air is their in that enclosure?

**Sonnie** · **09-17-09, 09:57 AM**

Check out the first post... it will give you all the details. It ended up being tuned to about 18.7Hz, so the volume or port is a bit off from what I planned.