Home Theater Forum and Systems banner

Qsc cx302

Tags
amp cx302 qsc
2K views 7 replies 2 participants last post by  MMMM 
#1 ·
Could the cx302 be used as a sub-woofer amp?
 
#2 ·
Yes, it can be but its output in Bridged mode is still only about 1200wats into 4ohms min. if your driver is lower than 4ohms you wont be able to use the amp in bridged mode and then you only get 600Watts into 2ohms
 
#3 · (Edited)
Is there anything better than the CX302 for a sub-woofer amp that is around $120? (it can be found on eBay for about that much)
I'm thinking of buying the CX302 because it is not as loud (I have heard a CX404 and it is quiet) or old as the others I've been looking at RMX850 etc.
 
#4 ·
Not really, thats about as good as it gets unless you get into the $250 range and up.
 
#6 ·
dont worry about it. you will be fine
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top