- Microphone for EQ Room Wizard
- First REW graph attempt - HSU3.3
- New JL fathom 113 Graphs
- How can I tell REW how to define a PEAK?
- Changing receivers changed my sub phase - normal?
- Passing REW EQ settings onto the DEQ2496?
- No peaks to correct, but they are there!
- Can I still run the 2nd to last REW??
- REW Virgin 1st results
- "No peaks to correct" message from REW
- Who knows about low frequency room modes?
- Second Time is the Charm with new REW
- 50 hz dip
- My first measurement graph, what is wrong??
- Stereo subwoofers with RoomEQ & a FBQ2496
- Is the Sound Blaster Audigy2 ZS Notebook a good choice?
- Can't calibrate sound card!!!
- Please help with hardware setup for REW
- First attempt at REW - Could use some quick feedback (no pun intended)
- Check levels too low
- Low measurement with REW?
- Calibration Mic Calibration?
- what's best place for sub?
- USB-Pre External soundcard
- REW w/software EQ?
- I need clarification of this pic.
- Interrupting Impulse Response
- First timer questions.
- REW - sets up right but then "check levels" too low
- Back to Square One
- Will ADS Technologies Pyro A/V Link work with REW?
- Converting 12db slope to BW Oct values I need for BFD
- Newb to RoomEQ
- My housecurve, REW, FBQ2496 & SVSs
- Two graphs, one normal and the other one corrected by the HK avr-635...what you think
- Latest REW graphs of my budget sub...
- A Welcome Surprise
- Help with 15dB dip 24 - 40Hz
- Problem with Room EQ Wizard running Vista?
- Did I do this right? Waterfall Graphs
- Mac revisited
- help!
- What to use for input
- Sound Card Calibration Problems
- Questions about my subs response.
- impulse response....
- Is rca mono to 1/4 stereo ok???
- first manual attempt?
- Please: help optimizing my graph
- Rookie at large - new subs - need advice please
- Alarms in REW?
- Calibration file AND c-weighted box?
- Repositioned sub and started to re-EQ
- My results - what do you think?
- How to print out REW help files?
- Wierd results from RoomEQ
- Cable Options for REW Connections
- Cut or Boost? How Much
- Problem writing House Curve files
- Newbie question about 33-2050
- MultEQ and REW
- Unrealistic Flatness in measured response
- speaker location and graph help
- Can REW be used to help set sub distance in receiver?
- Interesting discovery - receiver "modes"
- New speakers
- Creating my first house curve
- How do I measure, and then remeasure?
- REW will not calibrate the soundcard
- Wishlist for next REW upgrade...
- Problem right off the bat - please help
- First real measurement subs, subs+main, subs+main large
- Can REW show Fs in an IB?
- Moving REW EQ filter numbers into the BFD
- Question about Set Target Level As... option