 |
 | ||||
 |  |  |  | |
 |  |  |  | |
 |  |  |  | |
 |  |  |  | |
| ||||||||||||||||||||||||||
|  |  | |||||||
| Manufacturers Service and Support Convergence Prob VS60609 MitsubishiDiscuss Convergence Prob VS60609 Mitsubishi in the Home Theater | Audio and Video forum; Convergence Prob VS60609 Mitsubishi Blue moves fine Red will only move left and right when in setup. Besides Convergense chip STK393-110 is there anthing ...  |
  |
| | Thread Tools |
 Advertisement | |
| |  |
 08-26-07, 03:20 PM
| #2 (Link) | |||
| Re: Convergence Prob VS60609 Mitsubishi Bad solder joints on that IC or the IC itself. Be sure to see the thread on convergence repairs and buy the part from one of the suggested vendors. "It is better to debate a question without settling it than to settle a question without debating it." -Joseph Joubert Raise the bar. | |||
  |
| 10-21-07, 12:13 PM
| #4 (Link) | |||
| Re: Convergence Prob VS60609 Mitsubishi You likely missed an open resistor, botched up a trace or solder connection at the chip, or have a bad IC. Where did you get the chip? Read the detailed information that I have posted on convergence repairs at: http://www.hometheatershack.com/foru...html#post43725 "It is better to debate a question without settling it than to settle a question without debating it." -Joseph Joubert Raise the bar. | |||
| |
| |
 |
| « » |
| « |
| |
| Bookmarks |
| Thread Tools | |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Mits ws55819 convergence issues | Mike Phoebus | Manufacturers Service and Support | 5 | 06-21-08 05:58 PM |
| Hitachi Ultrascan HD Convergence Problem | kc7brown | Manufacturers Service and Support | 3 | 07-23-07 08:10 PM |
| ws-55809 convergence | rustamust | Manufacturers Service and Support | 5 | 06-09-07 04:27 PM |
| Mitsu convergence question... | MOBILE | Manufacturers Service and Support | 2 | 05-28-07 04:17 PM |
| Convergence Zone | Roger | Home Theater, Audio and Video News | 0 | 09-01-06 12:30 AM |
