 |
 | |||||
 |  |  |  | ||
 |  |  |  | ||
 |  |  |  | ||
| ||||||||||||||||||||||
|  |  | |||||||
| Mitsubishi Continued grainy and shadowing on Mitsu WS-65909Discuss Continued grainy and shadowing on Mitsu WS-65909 in the Brand Forums forum; Continued grainy and shadowing on Mitsu WS-65909 Follow-on thread for WS-65909 Manuf date 05/02. OK...I set sharpness way down below 50%, but now I see mild shadowing ... |
  |
|
Views: 243 - Replies: 1
| Thread Tools |
 01-06-09, 07:07 PM
| #1 | ||||
| Continued grainy and shadowing on Mitsu WS-65909 Follow-on thread for WS-65909 Manuf date 05/02. OK...I set sharpness way down below 50%, but now I see mild shadowing on a HDNet channel. Not same sharp picture I had before the convergence IC rip/replace. I used auto-reset for convergence, and then maually set red/blue. Still mild shadow and grainy looking. It almost looks like it is none-HD. I confirmed the res is 1080i standard via composite inputs directly off of a DirectTV HR-22 receiver. This all seems to be related to the IC repair. Any thoughts? Again, thank you for your patience and guidance. | ||||
 |
 Advertisement | |
| |   |
| 01-07-09, 07:14 AM
| #2 | ||||
| Re: Continued grainy and shadowing on Mitsu WS-65909 Please continue the discussion in the other thread. There is no need for two threads to discuss the same problem. Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
| |
