Hi all im new to this forum but not new to home theatre, i have owned now for a year my denon avr 3313, my reasion for joining this forum is to try and work out the setup of Audyssey, the past year i have reset and recalibrated the amp about 10 15 times and have learnt with every test.
My system is as follows.
Front L & R Sony ss-m500, 40-50.000 Hz Set to large
Centre Sony ss-cn250 85-20.000 Hz set to small
Surround L & R Eltax HT2 Bipolar 50-22.000 HZ set to small
Surround Back L&R Sony ss-sr250 85-20.000 HZ set to small
No sub at the moment
My issue has been levels especially the rears using audyssey the rears are always a little faint, but then using my sound level after improves things a lot more the clarity of sound directions, but i cant help think that Audyssey should make a better job of it than me manually doing it. Im very happy with the quality of sound, music is excellent and so are films but there some thing not quite right, when doing a setup the amp keeps showing out of phase for speakers centre and FR but i have checked the cable with meter from amp to speakers, but i will say some of the speakers Amit a slightly different ton with the test tone. I'm only using the rear seating area as the main listening area and using 6 positions with position 1 being in the centre of seat on a tripod above ear height. Ive uploaded some photos to show room layout and the levels calibration screen setting. the second photo is the level figures using my c- rated Sound meter. Any help greatly appreciated
Update
Tonight in have done another speaker recal and gained better results with the souns stage, position one was as always centre, but the rest of the 5 postions i used spaceing of 1 ft max from the centre mark, postions 5-6 and placed thr rtipod right on the edge of the seat cusions, its now shown me just how finiky this multi xt really is.
My system is as follows.
Front L & R Sony ss-m500, 40-50.000 Hz Set to large
Centre Sony ss-cn250 85-20.000 Hz set to small
Surround L & R Eltax HT2 Bipolar 50-22.000 HZ set to small
Surround Back L&R Sony ss-sr250 85-20.000 HZ set to small
No sub at the moment
My issue has been levels especially the rears using audyssey the rears are always a little faint, but then using my sound level after improves things a lot more the clarity of sound directions, but i cant help think that Audyssey should make a better job of it than me manually doing it. Im very happy with the quality of sound, music is excellent and so are films but there some thing not quite right, when doing a setup the amp keeps showing out of phase for speakers centre and FR but i have checked the cable with meter from amp to speakers, but i will say some of the speakers Amit a slightly different ton with the test tone. I'm only using the rear seating area as the main listening area and using 6 positions with position 1 being in the centre of seat on a tripod above ear height. Ive uploaded some photos to show room layout and the levels calibration screen setting. the second photo is the level figures using my c- rated Sound meter. Any help greatly appreciated
Update
Tonight in have done another speaker recal and gained better results with the souns stage, position one was as always centre, but the rest of the 5 postions i used spaceing of 1 ft max from the centre mark, postions 5-6 and placed thr rtipod right on the edge of the seat cusions, its now shown me just how finiky this multi xt really is.