Home Theater Forum and Systems banner

Need help with 15" driver selection for LLT

1K views 2 replies 3 participants last post by  Mike P. 
#1 ·
Hey everybody! Thanks for the warm welcome yesterday. This is an excellent forum!
I am looking for some help with an LLT design. I have read every post that I can find on it and I'm very intrigued by that systems potential. I've read through all of the helpful information put out by SteveCallas, Mike P. and Ilkka as well as many others.
I've purchased a QSC RMX 2450 (Bridge mono: 1,500W @ 8 ohms, 2,400W @ 4 ohms) and I'm trying to figure out what my driver options are. I would ideally like to do a 15" driver because of space limitations/aesthetics. Please chime in with current (available) driver options and any other suggestions are welcome.
I'm not sure if a dual 12" setup would suffice for a true LLT setup but I was looking at these drivers:
TC Sounds Epic 12" DVC Subwoofer
And for 15" options:
TC Sounds LMS-R 15" DVC Subwoofer
Dayton Audio TIT400C-4 15" Titanic Mk III
??

Many thanks!
 
#2 ·
I like the lms-r. I also like the RE-XXX 15 but it takes a gynormous enclosure. I did one with a Dayton RS 390 HF and really liked it but that sub doesn't have enough output for a single sub setup. I really would recommend a 15 over a 12 in any case.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top