| ||||||||||||||||||||||
| ![]() | ![]() | |||||||
| Panasonic / Technics Display is too darkDiscuss Display is too dark in the Brand Forums forum; Display is too dark Hello Everyone,
I have a panasonic 56 inch DLP tv, replaced the lamp a few weeks ago, but the display ... |
|
|
Views: 233 - Replies: 4
| Thread Tools |
| | #1 | ||||
| Display is too dark Hello Everyone, I have a panasonic 56 inch DLP tv, replaced the lamp a few weeks ago, but the display was darker than normal. Did a factory reset, tried every single adjustment, cleaned the entire TV from dust, but nothing worked. I can watch the tv in a dark room, setting directly in front of the set. I wonder if the lamp was defected, or something else might have gone wrong. Your Help is greatly appreciated. Thanks | ||||
|
| | |
| | |
| | #2 | ||||
| Re: Display is too dark First welcome to the forum. Could be a bad lamp. Do you still have the old lamp or did it go completley? If it was brighter with the old lamp then you could put the old one back in to see. If it's better then you can be certain it's the new lamp. ![]() | ||||
|
| | #4 | ||||
| Re: Display is too dark Could be a lamp supply ( ballast ). Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
|
| | #5 | ||||
| Re: Display is too dark I am ordering a new lamp, its always a good idea to have a spare anyways. If this solve the problem i'll post it. if not I guess I have to replace the ballast. Thank You All, You were a great Help ![]() | ||||
|