Cable adapter advice needed

**Laneman** · **10-08-07, 05:36 AM**

I have an Optoma EP716 projector with VGA and S-video ports (here's what the spec sheet says: (Dual D-Sub 15, VGA for Monitor Loop Through, S-Video, Composite Video, Audio Minijack, RS-232
). I'd like to use component video or even HDMI from my DVD player to the projector. I noticed they sell adapters- is this all I need, or do I need the converter boxes that convert VGA/component signals.

Lastly, please recommend DVD player features I should look for when buying. I am using an Onkyo surround sound system in the setup.

**Mike P.** · **10-08-07, 09:10 AM**

You will need a component to vga adaptor to connect component to your projector. Page 9 of the manual shows the component connection.
http://marketing.optomausa.com/PDFs/...716_Manual.pdf
HDMI is another matter. You will need a convertor box to convert the HDMI digital to VGA analog. Look to spend $150 to $200. Not worth the expense in my opinion.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advice Needed For A Used 5.1 Preamp	buggers	Home Theater Components	9	10-15-07 03:32 PM
Definitive Technology Bipolar selection advice needed!	The sound guy	Home Audio Speakers	1	08-13-07 01:32 PM
1st attempt at roomeq for sub advice needed.	shawn	REW Forum	20	04-25-07 08:29 PM
HDMi (dvd player) to reciever advice needed	gvw	System Setup and Connection	2	02-18-07 10:11 AM
Good Sub Cable w/Cheap Y-Cable... Lose Quality?	baniels	Remotes \| Cables \| Accessories	4	12-07-06 10:22 AM

Advertisement