first favor

[annacamilla]

salutes to all this is my first one post and hopes makes to understand me since uses a translator therefore does not speak l' English the question was, which audio card advised in order to make optimal measures to me with REQ? my computer is amd 2,2 ghz I have bought also ecm 8000, would go the mic800 well? thanks and salutes still

[salvasol]

Welcome to the forum

annacamilla wrote:

... which audio card advised in order to make optimal measures to me with REQ? my computer is amd 2,2 ghz I have bought also ecm 8000, would go the mic800 well? thanks and salutes still

Any soundcard with a line in and line out will work fine ... I got this SoundBlaster http://www.circuitcity.com/ssm/Creat...oductDetail.do

[annacamilla]

sure, what would change using emu 0404? I could avoid l' aquisto of pre the mic for behringer ecm the 8000?

[annacamilla]

I have put emu the 0404 because I have not felt to speak not well about the soundbalster live 24

[brucek]

The USB EMU 404 is fine, but a bit of overkill for simple REW measurements. You don't require a soundcard that good. But, it does have a mic preamp, so you wouldn't have to purchase one of those.

Avoid the Mic 800 if you get a preamp, use the XENYX 802 instead...

brucek

[annacamilla]

thanks for the answers



annacamilla

[annacamilla]

I have tried to unload the file of calibration for ecm 8000 ....... and it is not possible ..... c' it is some problem?



annacamilla

[brucek]

It works for me OK.

I've attached it to this post.

Just click and save to your desktop..

brucek

[annacamilla]

the rows I succeed to unload it but it turns out of dimension of 45,5 kb and installed on rew it says to me that c' it is error if the problem remains can ask to send it for mail?





annacamilla.

[brucek]

The file is valid that I posted in my thread above.

Follow these instruction and it will work.


-------------------------------------------------------------------------------
Left click the link, as shown below.


-------------------------------------------------------------------------------


Left click Save on the download popup, as shown below.


-------------------------------------------------------------------------------


Select the location in your computer to save the file, as shown below.


-------------------------------------------------------------------------------


Download complete box will show the job is done. Left click Close, as shown below.


-------------------------------------------------------------------------------


Start REW. Select Settings screen. Select Meter tab.
Left click Browse and select the directory where the file is stored in your computer, as shown below.


-------------------------------------------------------------------------------


You will see the file is loaded, as shown below.


-------------------------------------------------------------------------------

brucek

[annacamilla]

I have understood like unloading the problem is that the rows that you have on your serveur do not work







annacamilla

[thewire]

http://www.hometheatershack.com/foru...vor-newecm.cal

[thewire]

Or maybe try and copy then past then into a text program such as notepad, then save as newecm.cal. The file size should be like this and not 45,5 kb.

5.00 -24.79
6.30 -16.22
8.00 -12.54
10.00 -9.23
12.50 -6.64
16.00 -4.68
19.95 -3.09
25.12 -2.08
31.62 -1.30
39.81 -0.83
50.12 -0.41
63.10 -0.14
79.43 0.00
100.00 0.15
125.89 0.22
158.49 0.22
199.53 0.26
251.19 0.26
316.23 0.26
398.11 0.22
501.19 0.20
630.96 0.14
794.33 0.07
1000.00 0.00
1258.93 -0.07
1584.89 -0.13
1995.26 -0.23
2511.89 -0.27
3162.28 -0.13
3981.07 -0.22
5011.87 -0.30
6309.57 -0.25
7943.28 -0.17
10000.00 -0.15
12589.25 -3.77
15848.93 -7.48
19952.6 -9.01

[brucek]

the rows that you have on your serveur do not work

What is a row?

brucek

[annacamilla]

thanks to all ..... are successful to unload the file cal the problem was in the dap (download accelerator plus) now it is all to place thanks still!




annacamilla.