What cable would I need

[gus6464]

What cable would I need if I have an m-audio mobile pre usb sound card, ecm8000 mic, and a DSP1124 so that I can download the REW calibration information directly to the feedback destroyer? I read in the REQ faq that a usb to midi cable could be used if using the built in sound card on a computer but I was wondering if the M-Audio Mobile Pre already has a midi out port. Thanks in advance

[brucek]

I was wondering if the M-Audio Mobile Pre already has a midi out port

You use your PC's USB ports........

brucek

[gus6464]

brucek wrote:

You use your PC's USB ports........

brucek

But is there something cheaper that can be used other than that $40 cable from amazon? I was wondering if the mobile pre already had a midi out port so that I could possibly get away with a cheaper cable or something.

[brucek]

But is there something cheaper that can be used other than that $40 cable from amazon? I was wondering if the mobile pre already had a midi out port

I don't think the Mobile Pre has a midi port.

The cheapest route is to enter the filters by hand. It only takes seconds. I've never owned a midi cable myself. Not because of the cost, but because I can enter the filters before you could connect up the cable...

brucek

[Anthony]

The Mobile Pre does NOT have a MIDI out port. I have one and that's always been an issue.

M-Audio sells a USB to MIDI converter (as do many others): http://www.zzounds.com/item--MDOUNO

But yeah, it's $40. I just fat finger in settings manually. A pain, but I only play around with the settings once every year or so.