Hello all,
I have finally gotten my subwoofer system up and running, so now it's time to EQ my subs.
Here's a little bit of background on the equipment.
AVR: Pioneer Elite - SC-65
Front L/R Speakers: 1963 Bozak (2x12" woofers in each cabinet) *I know, not the best choice for home theater
Subs: 4x18" FiCar - These are installed in the ceiling in manifold configuration (Infinite Baffle), one at the front of the room and one at the rear (near the peak of the vaulted ceiling).
Sub Amp: iNuke NU3000 (running in stereo mode for 880 watts going to each manifold).
Sub EQ: MiniDSP 2x4 Balanced - Connected with composite cable from AVR and input jumper set to 2V.
Mic: Cross Spectrum Labs UMIK-1
Both manifolds have been gain matched and time aligned.
Last night I took a few measurements:
1) The front L/R with the sub amp turned off
2) Both subwoofer manifolds on with the front L/R mains turned off
This allowed me to see the crossover point and see how things performed without everything playing at once.
I have finally gotten my subwoofer system up and running, so now it's time to EQ my subs.
Here's a little bit of background on the equipment.
AVR: Pioneer Elite - SC-65
Front L/R Speakers: 1963 Bozak (2x12" woofers in each cabinet) *I know, not the best choice for home theater
Subs: 4x18" FiCar - These are installed in the ceiling in manifold configuration (Infinite Baffle), one at the front of the room and one at the rear (near the peak of the vaulted ceiling).
Sub Amp: iNuke NU3000 (running in stereo mode for 880 watts going to each manifold).
Sub EQ: MiniDSP 2x4 Balanced - Connected with composite cable from AVR and input jumper set to 2V.
Mic: Cross Spectrum Labs UMIK-1
Both manifolds have been gain matched and time aligned.
Last night I took a few measurements:
1) The front L/R with the sub amp turned off
2) Both subwoofer manifolds on with the front L/R mains turned off
This allowed me to see the crossover point and see how things performed without everything playing at once.