What action to take after measurement

[basnootdorp]

Hi,

After reading a lot of stuff at the forum I started up myself to do some measurements.
Some information first: I have a SVS PB12 Plus/2, in a room of 4meter by 4meter.
I made some measurements for the 3 possibility's to tune the sub.

16hz green
20hz blue
25hz red



What tune frequency is advisible to use based on the graphic shown, and second should I use the PEQ of the sub to remove a peak at a certain point?

[wackii]

basnootdorp wrote:

Hi,

After reading a lot of stuff at the forum I started up myself to do some measurements.
Some information first: I have a SVS PB12 Plus/2, in a room of 4meter by 4meter.
I made some measurements for the 3 possibility's to tune the sub.

16hz green
20hz blue
25hz red

Attachment 12289

What tune frequency is advisible to use based on the graphic shown, and second should I use the PEQ of the sub to remove a peak at a certain point?

For sub's graph, the experts here (not me) prefer vertical axis to be 45db - 105db and horizontal of 15hz - 200hz. From your graph, it looks like the 20hz tune is the best. At >70hz region, it looks like the sweep volume is too low. Other noises might creep in and effect the accuracy of your FR. I'm no expert here, still learning myself

Al,