Slaughter House House/Knee Curve

[carls64]

I figured I would start a new thred for my house curve and hard knee curve (attempted)

I re-ran all my tests and re-calculated/manual set 5 filters, I tried 3 and I wasn't happy with the results so I added two "push" filters.

Here is what I started with, no filters:


Filters added


Corrected results


Next I will find my house curve

[carls64]

Ok Wayne now what do I do, I am suppose to set the tone generator to my cross over freq of 80hz play a tone, then change to 32 and play a tone, but clearly the 32 sounds louder than the 80 does and in fact db wise there is a 2 db difference.

[brucek]

Ok Wayne now what do I do

Tell us what a "push" filter is?

but clearly the 32 sounds louder than the 80 does

You of course have the mains turned on when you do this test.

brucek

[carls64]

brucek wrote:

Tell us what a "push" filter is?

LOL my attempt at giving a new term that I had none for I applied a positive filter

brucek wrote:

You of course have the mains turned on when you do this test.

brucek

NO!
Duh!
Be back in a bit ;-)