Will this REW Setup work? RS SPL -> Line-in + COAX OUT -> Stereo System?

[semiblocked]

I have my RS SPL METER 33-0225 hooked up to my soundcards blue Line-IN using a Mono RCA - 3.5Mm Male. Then I have my Coaxial out connected to a stereo-system. It's a nice one too.

This seems to create realllllly messed up logs.

[Wayne A. Pflughaupt]

Try re-scaling the graph to our standard 10-200 Hz, 45-105 dB window and let's see what it looks like then.

You can use our post padding thread to rack up your five required posts, then you can upload your graphs to our server.

Regards,
Wayne

[brucek]

Line-IN using a Mono RCA - 3.5Mm Male

The line-in is usually stereo, so you require an adapter that breaks out the left and right channels. Same goes for the line-out.

Then I have my Coaxial out connected to a stereo-system

You need to use the analog line-out and not the digital out with REW, so you can calibrate the soundcard.

brucek

[semiblocked]

It looks right to me...but that really sucks for a general reading. I'm using a 2.1 system to get that. I can't wait till I get my monitors\panels.

I have my listening position at 38% length from back of room. I also have the equilateral triangle setup as well. I just felt like figuring out my readings.

I spent $56 on this reader..convince me it was worth it.

Edit: Found out how to limit the graphs: