First post with pic. Hello!!!

**10-14-06, 12:08 PM**

Get ready for some questions! lol Just got the BFD yesterday but the SPL meter from SVS didn't come yet so I borrowed the display model from radio shack. Before anyone questions my morals I told the guy I'm bringing it back and he didn't care and a bonus it had batteries in it. Who can wait all weekend anyway!!!! hehe

I read the threads all week so I'll try my best to figure it out.

Pioneer 815K
Athena's all the way around
Toshiba HDMI DVD 1080i
Toshiba 51"
DIY Dayton MKIII BASH 300 tuned 20-24Hz (we'll find out soon)

**Exocer** · **10-16-06, 02:13 PM**

Okay. So did you solve the "hum" problem? Can anyone suggest what one should do if the BFD actually causes some feedback/interference/ humming issues?

**brucek** · **10-16-06, 03:59 PM**

Quote:

Can anyone suggest what one should do if the BFD actually causes some feedback/interference/ humming issues?

Do you have a problem?

brucek

**10-16-06, 09:02 PM**

Actually I did figure out a work around after more hours than I care to admit. The hum would stop after I pulled the cable TV out of the back of the cable box. I noticed that if I just stuck the wire in and didn't screw it on I wouldn't get the hum and the picture was on. I took some masking tape covered the threads then screwed the cable back in at it was gone. Picture and sound are fine. Hope this can help others.

**Exocer** · **10-16-06, 09:16 PM**

Thanks for asking Bruce, I don't though.
I directed him here because he had an interference problem.

Advertisement