| |
|
Welcome to Home Theater Shack forums... a home theater forum for discussion of home theater design, construction and audio video electronics. Check out out popular DIY forums for subwoofers and projector screens as well as our famous Subwoofer Tests forum. Don't miss our DVD, HD-DVD and Blu-ray forums including DVD media reviews and the latest DVD releases.
You are currently viewing our forums as a guest which limits features and access to certain areas. For full access, login or register. Registration is fast, simple and absolutely free... so please, join the Shack today! If you have any problems with the registration process or your account login, please contact us. |
| ![]() | ![]() | |||||||
| Home Theater Links | Image Gallery | Donations | Glossary |
| REW Forum My BFD / REW resultsDiscuss My BFD / REW results in the Subwoofer Equalization | Calibration forum; My BFD / REW results I thought I would start off and show how the response of my Servo-15 sub was improved by my BFD ... |
![]() |
| | Thread Tools |
| | #1 (Link) | |||
| My BFD / REW results I thought I would start off and show how the response of my Servo-15 sub was improved by my BFD (Behringer Feedback Destroyer). I used REW (Room EQ Wizard Software) to sweep my HT room and suggest filters to enter into the BFD. I don't use the cable from my computer to automatically set the filters in the BFD (but I should). I'm so **** fast setting the filters into the BFD I don't bother with the cable, but using the cable is a nice way to do it though. Below is the response without any filters set. ![]() Below is the response after entering my filters as suggested by the REW software. Not too bad a result. You can see I added a small house curve into the REW to boost the signal from 60Hz down to 30Hz by about 5dB. We usually like to set the X-axis of our graphs from 15Hz to 200Hz and the Y-axis from 45dB to 105dB. This way everyone is comparing the same thing. Some people like to get the response absolutely perfect, but it's really not required. ![]() Below is how I have my computer hooked up to use REW software with my HT system. The cables are quite easy to purchase or make yourself. You don't use the left channel except to originally short it out to create a soundcard calibration file to compensate for your soundcards response. ![]() brucek | |||
|
| | |
| | |
| | #4 (Link) | |||
| Re: My BFD / REW results Yeah, that's a hole capable of swallowing any amount of power I can throw at it. It is directly caused by the door to my kitchen being open. If I shut the door, the notch goes completely away. Very cool. I like the door open, so I live with it..... ![]() brucek | |||
|
| | #6 (Link) | ||||
| Re: My BFD / REW results Quote:
brucek | ||||
|