Target response / House curve

[sonata31]

What is the difference between the Target response and the House curve ?

[Gard]

sonata31 wrote:

What is the difference between the Target response and the House curve ?

Target response is either with or without the house curve. House curve is just compensating for how bass sounds in your ears in your house. Normally a house curve raises the level from 80Hz(0dB gain) to 30 Hz(5-8dB gain). House curve is added, together with other calibrations like soundcard and mic. To calculate the response you want/need in your room (Target response).

[sonata31]

Gard wrote:

Target response is either with or without the house curve. House curve is just compensating for how bass sounds in your ears in your house. Normally a house curve raises the level from 80Hz(0dB gain) to 30 Hz(5-8dB gain). House curve is added, together with other calibrations like soundcard and mic. To calculate the response you want/need in your room (Target response).

Thank You

[sonata31]

Still confused

Target response, House Curve, Bass management curve, Speaker Type, Target Level

What are the connections between these notions ?

[Ayreonaut]

sonata31 wrote:

Target response, House Curve, Bass management curve, Speaker Type, Target Level

Target Level + Low Pass Filter + House Curve = Target Response

Speaker Type should be set to subwoofer in this application.
Bass management includes Low Pass Filtering of the subwoofer signal.

[Ayreonaut]

Like this

Target Level = 75 dB


Target Level + Low Pass Filter (Subwoofer Cutoff) @ 80 Hz


This House Curve adds an 8 dB rise from 80 Hz down to 30 Hz.


Target Level + Low Pass Filter + House Curve = Target Response


Filter your measured response to hit the target.

[sonata31]

It is ok

Thank You