First REW graph attempt - HSU3.3

**camtah** · **02-27-07, 05:59 PM**

Here is my first time usage of REW and my new Hsu VTF3 MKIII sub I just purchased.
My HT is 13W-19L and 7H. The subs final location in front center under the center channel speaker. This location gave me the best response compared to other room locations, that is if I did this correctly.

Anyways, for your amusement....

**Wayne A. Pflughaupt** · **02-27-07, 08:28 PM**

Nice response. Great house curve too, if your room is really small. You plan on getting a BFD?

Regards,
Wayne

**camtah** · **02-27-07, 08:37 PM**

Actually, I am looking at a 1124p, but I wanted to see what I was looking at first.
I was quite surprised at the response in my current sub location. I am wondering what I can do for the null ~61 Hz. Other than that, I feel that for a first stab at using
REW, that it was a pretty decent start. Thats why I am wondering if I did the measurements correctly

**brucek** · **02-28-07, 08:33 AM**

Quote:

I am wondering what I can do for the null ~61 Hz

The dip isn't wide enough to be a concern.

If I had that response, I would probably remove my BFD.....

brucek

**camtah** · **02-28-07, 05:15 PM**

Hey.. a built in 60Hz power line filter

**adogand6kids** · **03-02-07, 04:14 PM**

I am not sure if you are getting an accurate reading. Given your subs stats from the Hsu website it seems hard to imagine it would be down by 20 dB from 30 Hz to 50-800 Hz. The decline is too broad to be modal. Does that look unusual to anyone else?

**adogand6kids** · **03-02-07, 04:16 PM**

it seems hard to imagine it would be down by 20 dB from 30 Hz to 50-800 Hz.

Whoops! That should read "50-80 Hz".

**tdamocles** · **03-02-07, 06:13 PM**

Quote:

adogand6kids wrote:

it seems hard to imagine it would be down by 20 dB from 30 Hz to 50-800 Hz.

Whoops! That should read "50-80 Hz".

Maybe he has his xo at 60 hz?

**camtah** · **03-02-07, 07:18 PM**

Yes ..my XO was at 60HZ for my mains only, 80Hz the rest of the way around. I since changed it to 80Hz all around and will retest

**Blaser** · **03-03-07, 01:47 PM**

How big is your room, shape? sealed?

**camtah** · **03-03-07, 10:34 PM**

13W x 19L x 7H. Located in basement

Front and side walls are poured concrete with Styrofoam insulation, wood frame and drywall. Back wall has framed wall with 7' by 3' pass thru bar opening out to 24 x 12 rec room. All floors commercial grade carpet with wool pad over concrete floor. Entrance to HT is on the side, 4' opening.

**Blaser** · **03-03-07, 11:28 PM**

Thank you Camtah for your description. This is roughly a 1750 cuft room. Indeed, the room gain seems to start very soon below 50 Hz(good thing! the sub should be playing effortlessly). I don't think the 60 Hz crossover is fully resonsible for this, as the HF roll starts roughly at 40 Hz.....

Pls let us have you response with 80 Hz Crossover.

B Rgds
Blaser

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
First attempt at REW - Could use some quick feedback (no pun intended)	jaegertc	REW Forum	18	02-26-07 09:00 AM
Diy Sub REW Graph	c3ham	REW Forum	6	09-16-06 02:09 PM
First attempt with REW, how am I doing?	Darren	REW Forum	19	06-16-06 03:55 PM
REW-graph for SVS PB12 Plus/2	rcarlton	REW Forum	33	06-03-06 01:55 PM
Using REW Waterfall to calibrate sub instead of FR graph	oliverlim	REW Forum	38	05-07-06 05:51 PM

Advertisement