Parsing Error Creating Make Cal file

[dbbarron]

I just installed REW and and having lots of fun - windows PC, Sound Blaster Live internalm Behringer mixer and ECM8000. Using only simply loopback, the soundcard appears to fall off about 10-20k and below 10HZ with a slight (1db) rise from 20hz to 100hz.

When I go through the cal procedure, everything is fine, I get the above described curve, but when I go back to the settings window and click on Make Cal...and enter the file info, I get an error box stating:

File Parsing Error at Line 8
Line has Frequency 0.0 which is not higher than the preceeding frequency 0.0
See help file....

I get the same errors when I try to load the cal file.

I think it is making the cal file fine, but the loading is in error

I installed Java 6 rather than 5 - could this be an issue?

The cal file (or the first screen of it) is below.



Any suggestions?

db

Soundcard Calibration data saved by Room EQ Wizard V4.00
Source: Input device not selected, no input selected, Right channel, volume: no control
Format: 256k Log Swept Sine, 1 sweep
Dated: Mar 24, 2007 3:08:51 PM
Sample Rate: 48000

0.000 -54.448
0.200 -47.296
0.400 -40.470
0.600 -35.243
0.800 -30.375
1.000 -26.209
1.200 -22.540
1.400 -19.355
1.600 -16.699
1.800 -14.296
2.000 -12.399
2.200 -10.601
2.400 -9.261
2.600 -7.989
2.800 -7.015
3.000 -6.141
3.200 -5.450
3.400 -4.866
3.600 -4.380
3.800 -3.984
4.000 -3.628
4.200 -3.327
4.400 -3.037
4.600 -2.771
4.800 -2.508
5.000 -2.260
5.200 -2.024
5.400 -1.806
5.600 -1.612
5.800 -1.438
6.000 -1.295
6.200 -1.164
6.400 -1.060
6.600 -0.960
6.800 -0.872

[dbbarron]

Problem fixed......

I deleted the text header and first few data pairs. Loaded and works fine....

db