Home Theater Forum and Systems banner

Yamaha USB mixer

Tags
mixer usb
1K views 1 reply 2 participants last post by  EarlK 
#1 ·
i recently purchased a Yamaha MG206C usb mixer. could i use that to connect REW to my laptop. using it as a usb interface?

thanks
 
#2 · (Edited)
RULE #1 :
Success ( or failure ) in using REW with any USB mixer is determined by the requirement that the ( acquired ) input signal ( arriving into REW )
never gets "mixed into" in the outputted "TEST" sweep, ( that's being fed to the speaker under test ) .
> FYI, ( some USB mixers route/place the analog input signal, directly onto the analog output busses // this is a "NO-NO" for REW use ).

SUGGESTION :

> Use REW's ASIO setting ( since your mixer has an ASIO driver ) & give it a go ( see what you can accomplish ).

> See if you can make a clean soundcard calibration ( read the stickies for help ).

:sn:
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top