Home Theater Forum and Systems banner

Yamaha HS50m nearfields

3K views 1 reply 2 participants last post by  AudiocRaver 
#1 ·
Hello!

I've been testing my Yamaha HS50m nearfields in a new room today.

REW results below are from 28" (my mixing position) using a Rode NT1a. I'd be very grateful for any views on the results. The room is very oddly shaped, and the best result came from sticking them way back (5" from back wall) into an alcove where I'd built a 6" plasterboard sound reduction/bass trap wall. Other than this, it's an untreated room.

Text Line Plot Pattern Slope


Purple Violet Text Plot Pattern


Thanks in advance
Andy
 
See less See more
2
#2 ·
Hi Andy, and welcome to HTS!

You are getting meaningful measurement results. Looks like not a bad start for a relatively untreated room. It would be nice to smooth out the response a bit. Could you post your REW measurement file so we can see more details?

Actually, as far as REW use is concerned, you seem to be doing fine. What you might do is draw a room diagram, then post it plus your measurement file with separate left & right speaker plots over on the Home Acoustics forum, as further room treatment sounds like the next logical step.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top