Is REW supposed to work with Soundmax onboard audio line input. I did the first step today and ran the loop back from front sp to line in, the input level was turned all the way up but only got -97db so I connected to the mike input with mike boost on . I forget what it said I think it was inacurate waveform error ,and the setup did not complete.
Can you show us a picture of the Windows playback and record mixer settings (unless you have Vista)..
You can't use the mic input. It must be line-out to line-in.
Also remember that those plugs are stereo and so you must use a stereo plug that breaks the two left and right channels out so you can connect the right or left channel in the loop.
I figured it out, the jack auto sensing did not see the input so i checked tha auto aenseing box and it was activated. Now I can start measurements, if only my onboard audio wasent so noisy.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Home Theater Forum and Systems
742.3K posts
170.9K members
Since 2006
A forum community dedicated to home theater owners and enthusiasts. Come join the discussion about home audio/video, home theaters, troubleshooting, projects, DIY’s, product reviews and more!