Combining House Curves and filter sets

[Testpattern]

Question.

I understand how to issue a set of filters to my BDF using REW and save those in REW as a file and in the BFD as a memory location.

When I add a House Curve, do I just apply it to the new response obtained after re-measure of the adjusted response and send this "adjustment" to the BDF location containing the stored filter set?

I'm missing something about how you add the house response to the ajdusted curve and get this into the BFD as one set.

Help.... Please.... I'm lost on this aspect of this neat tool.

[brucek]

I'm missing something about how you add the house response to the ajdusted curve and get this into the BFD as one set

You don't. You simply issue a new set of filters to the BFD that you created by doing a sweep and creating a new filter set with the house curve as the new target..

brucek

[Testpattern]

Cool... Thanks Brucek

[Wayne A. Pflughaupt]

When I add a House Curve, do I just apply it to the new response obtained after re-measure of the adjusted response and send this "adjustment" to the BDF location containing the stored filter set?

If I understand, you’re asking if you apply the house curve after you’ve equalized, then re-measure and re-equalize?

I think most people here apply the house curve target before the initial equalization. At least I do.

Regards,
Wayne

[Testpattern]

And this is what I'll do now that I know better....