REW on Big Screen Problems

**gacole2000** · **07-04-06, 01:10 PM**

Hello. I bought an interface to allow me to hook up my computer to my TV but have an unexpected problem. I can not view the lower half of the REW screen (everything else views fine???) no matter what I try, which is where the settings are that I need to get started. Has anyone had a similar problem that can offer some advice or is there another way to set the device types?

Thanks! Greg

**brucek** · **07-04-06, 01:13 PM**

Tells us what the device is?

**JohnM** · **07-04-06, 02:18 PM**

What screen resolution are you using? Need 1024x768 minimum, some TVs only handle VGA (640x480).

**gacole2000** · **07-04-06, 02:35 PM**

http://cgi.ebay.com/ws/eBayISAPI.dll...MEWN%3AIT&rd=1

I will adjust my resolution again as it was hard to read. Thanks!

**gacole2000** · **07-04-06, 06:19 PM**

That worked, but it's very hard to read. Thanks!

**Chrisbee** · **07-14-06, 03:44 AM**

If you are running XP you can go into Control Panel>Display>Settings>Advanced>DPI settings and adjust the size of everything on the screen that way. (May mean a restart)

When I first obtained my LCD screen everything was sharp but just too small to read.

This tip from another forum member worked nicely.

Advertisement