| ||||||||||||||||||||||
| ![]() | ![]() | |||||||
| Samsung trouble shoot a Samsung DLP 50"Discuss trouble shoot a Samsung DLP 50" in the Brand Forums forum; trouble shoot a Samsung DLP 50" I have a Samsung HLR5067WAX/XAA which is 3 years old. I just moved and but not working. The power is ... |
|
|
Views: 512 - Replies: 9
| Thread Tools |
| | #1 | ||||
| trouble shoot a Samsung DLP 50" I have a Samsung HLR5067WAX/XAA which is 3 years old. I just moved and but not working. The power is working, Cooling fan on, bulb lights up, but no picture or sound tried resetting by leaving unplugged over night, but still does project. it was working before one ay 4 mile trip without damage. The power switch on front flashes "bulb" in green and the reverts back to standby mode. the bulb shuts off at that point. I have same service and hd cables. any suggestions. Thanks in advance for help I am new to this site or any site. | ||||
|
| | |
| | |
| | #2 | ||||
| Re: trouble shoot a Samsung DLP 50" Your post will be moved to the Samsung forum to maintain forum organization. The lamp lights up? Do the menus or OSD work? Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
|
| | #3 | ||||
| Re: trouble shoot a Samsung DLP 50" Nothing onscrene just black. no sound either. but the lamp light flashes and then to stand by. it was set up on Verizon HD service and that is what is in new location | ||||
|
| | #4 | ||||
| Re: trouble shoot a Samsung DLP 50" Change the lamp. Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
|
| | #5 | ||||
| Re: trouble shoot a Samsung DLP 50" Thanks for advice. I had it unplugged over night and it first went on. then i moved it it stopped working. I rattled it a little and it is working fine. I know its getting close to blb replacement also. thanks for suggestions | ||||
|
| | #7 | ||||
| Re: trouble shoot a Samsung DLP 50" I think I found a way to repair this please check out my posting about how I think I found a way to repair the digital board. my tv was doing the same thing. also look at the back of your tv if the lamp is lighting up then you dont need a lamp. | ||||
|
| | #8 | ||||
| Re: trouble shoot a Samsung DLP 50" The thread below may be helpful, as it details my version of the pressure on the chip fix, along with the part numbers for that set. http://www.hometheatershack.com/foru...tml#post184935 Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
|
| | #10 | ||||
| Re: trouble shoot a Samsung DLP 50" Teddybear, please do not post the same question repetitively. Your duplicate posts were deleted. I strongly suggest you post your problem in a new thread with a description of your symptoms in your words, along with any troubleshooting or other relevant information. Referring to someone else's problem is not a good way to get effective assistance. If you read the related threads you will see much discussion of these problems and the problems with the fixes. Note that we have now begun moving vendors to the new pull down option at the top of the forum pages. You will find it between "Shack Shopping" and "Glossary". This will represent a great improvement in the vendor reference database, making it easier than ever to find what you are looking for. Contact me with any suggested entries, category recommendations, or additional information about the vendors that we have. If you are a vendor and want your company listed, there is an option to provide us with the information. | ||||
|