My RL-P15 Infinite Baffle system

[RobertR]

I'm using 8 of the RL-P15s. The Vas turned out to be just right for my IB space which is 3 feet behind the front wall. It sounds wonderful:

[Bent]

I have nothing good to say - except I'm jealous.

this looks really good.

[Ricci]

Looks like it's going to be a very nice set-up. What's the amplification for the RLP's? Also what are your mains and center speakers going to be?

[RobertR]

I'm using the Behringer EP2500 into 2 ohms per panel. My LCRs will be VMPS. Here are the front L and R:




Here are the specs:

Frequency response: +0, -3dB 16Hz-40kHz; average THD 0.9%/1W drive

Driver complement: Two 12" carbon fiber woofers, 12'' slot-loaded, mass-loaded PR subwoofer; 52'' ribbon panel midrange, dual spiral ribbon tweeters.

Nominal impedance: 4 ohms

Sensitivity: 89dB/1W/1m

Recommended amplifier power: 350W RMS, 20W min

Performance: 115dB/1m SPL for 5% THD

Dimensions: 14 1/2''W x 68''H x 17 3/4''D plus the width of the ribbon panel

Weight: 375lbs

[atledreier]

That's wicked! Looks awesome! Knowing what two RL-p15's can do, well... Rock on!