SoundSplinter RL-P15 build

**lglura** · **10-28-08, 06:00 PM**

Ok guys, received my second unit friday, and i`m ready to build two sonosubs. If anyone like to see my build i`ll post pictures

**atledreier** · **10-28-08, 06:42 PM**

Yes please! Been ages since the last SS build!

**Mike P.** · **10-28-08, 08:26 PM**

I agree. Lots of build pics please!

**lglura** · **10-29-08, 02:34 PM**

Ok, can`t resist your begging
Here is my workshop, and as a famous norwegian cook says "i have done some preparation".

Name: IMG_0318.jpg
Views: 1156
Size: 52.1 KB

Name: IMG_0318.jpg
Views: 1156
Size: 52.1 KB

**atledreier** · **10-29-08, 02:41 PM**

7 layers for each tube... WHat's your plan? Brace for the port? Triple top, quad bottom?

DIY satellites as well?

**Bent** · **10-29-08, 02:50 PM**

likely doubled base plates, doubled driver baffle and trippled top plates to help support the port tubes.
(just a guess).

**lglura** · **10-29-08, 03:01 PM**

My plans are changing all the time

, triple bottom and top, and yes i`ve decide to brace the port. The encloseres you see on the left is my diy satelites.

**lglura** · **10-30-08, 03:17 PM**

Need some help.
How large do i need to make the flares. The ports are 6"x 30". I`ve planned to make
"donutflares"

**atledreier** · **10-30-08, 03:31 PM**

Get your largest roundover bit..... That's your size...

Seriously, I have 6" ports and a 1/2" roundover, and no chuffing.

**lglura** · **10-30-08, 04:16 PM**

Quote:

atledreier wrote:

Get your largest roundover bit..... That's your size...

Seriously, I have 6" ports and a 1/2" roundover, and no chuffing.

My largest routercutter is 30mm, but then the donut is going to be 60mm diameter, and thats large.
Have also a 15 mm cutter and if you dont have any chuffing thats the size i`m going to use.

**atledreier** · **10-31-08, 02:20 AM**

You'll love them!

Beware though. Mine are jumping a bit on the floor at insane levels. I've been told it's because I have no baseplate. Maybe you should consider that in your design.

**Rodny Alvarez** · **10-31-08, 08:04 AM**

looking good!!

More pics please

I ordered a 1 1/2 round-over bit for my flares it was about $35.

**lglura** · **10-31-08, 05:54 PM**

Quote:

atledreier wrote:

You'll love them!

Beware though. Mine are jumping a bit on the floor at insane levels. I've been told it's because I have no baseplate. Maybe you should consider that in your design.

Thanks Atle. i`ll deal with that problem when it happens.