Behringer Xenyx 802

**avaserfi** · **10-24-08, 01:28 AM**

Xenyx 802

Testing chain: External loopback (line-out - line-in)
Sampling mode: 24-bit, 96 kHz

Looped with EMU 0404 USB 1/4 TRS Input - RCA Output

Frequency response

Noise Level

Dynamic range

THD + Noise (at -3 dB FS)

Intermodulation distortion

Stereo crosstalk

IMD (swept tones)

**avaserfi** · **10-24-08, 01:28 AM**

Xenyx 802 - Special Test

Testing chain: External loopback (line-out - line-in)
Sampling mode: 24-bit, 96 kHz

Looped with EMU 0404 USB 1/4 TRS Input - RCA Output

Frequency response - Infrasonic Extension

Based on this the F3 is between 6-7Hz with the unit down about 1-2dB at 10Hz.

Frequency response - High Frequency Extension

**Ricci** · **10-24-08, 03:42 PM**

Andy,
Can you expand your measurements beyond 20 and 20khz mainly for us crazies out there

who try to get response below 10hz? Most modern day electronics are going to be fine between 20-20khz. I'm very interested in what happens at the extremes and I know others are too. My Xenyx 1202 measured very well atleast as far as the FR was concerned. Thanks.

**avaserfi** · **10-24-08, 04:15 PM**

Quote:

Ricci wrote:

Andy,
Can you expand your measurements beyond 20 and 20khz mainly for us crazies out there

who try to get response below 10hz? Most modern day electronics are going to be fine between 20-20khz. I'm very interested in what happens at the extremes and I know others are too. My Xenyx 1202 measured very well atleast as far as the FR was concerned. Thanks.

Added to post two. Enjoy!

**lovebohn** · **03-19-09, 01:28 PM**

Is it just me or are the links to the pictures bad?

**brucek** · **03-19-09, 01:37 PM**

Yeah, they've been removed.

I'll probably delete this thread.......... in a bit.

brucek

Advertisement