Mic Pre-Amp Options

**MichiganMan** · **12-01-08, 04:19 PM**

I'm thinking about upgrading to a Behringer ECM8000 Microphone for the REW software.

Are there other pre-amp options to the XENYX 502, 802 mixer boards?

**tonyvdb** · **12-01-08, 05:07 PM**

There is the TAPCO Mix50

**MichiganMan** · **12-01-08, 06:39 PM**

Is there something simpler?

I'm not familiar with mic equipment. It just seem strange there isn't a simpler way to power the mic and patch in the signal.

**tonyvdb** · **12-01-08, 07:10 PM**

Not for less than $45, The lower priced mixers do not have XLR inputs so they cant be used and you need to have some sort of level control.

**audionut71** · **12-30-08, 08:40 AM**

I use the Rolls MP13 for my TrueRTA setup and the Behringer Mic. Simple, easy to use, and has phantom power. I did not want to carry around a mixing board just to have a powered mic input.

http://pro-audio.musiciansfriend.com...amp?sku=428714

I have seen it cheaper, just wanted to put up a link so you could see it easily.

Advertisement