| ||||||||||||||||||||||
| ![]() | ![]() | |||||||
| SPL Meters | Mic's | Calibration | Sound Cards What else needs to be done?Discuss What else needs to be done? in the Equalization | Calibration forum; What else needs to be done? I just inherited some new HT components.
A Yamaha HTR-5280 Receiver and a JBL PB12 Subwoofer
The receiver will be ... |
|
|
Views: 262 - Replies: 3
| Thread Tools |
| | #1 | ||||
| What else needs to be done? I just inherited some new HT components. A Yamaha HTR-5280 Receiver and a JBL PB12 Subwoofer The receiver will be used to process audio only, no video. I have 3 inputs to the receiver, all using optical connections: DirecTV HD DVR Xbox 360 Popcorn Hour A-110 Which outputs to my 5 and now.1 speakers. Speakers use 12 GA Speaker Wire. Sub. Uses Line Level In I want to get the most performance possible and therefore I want to make sure everything is just right. So far I have: I turned off all DSP programs and set for auto source selection. Set size of all speakers to small. I believe the receiver has a fixed crossover of 90 Hz. Is this right? Set Subwoofer to LFE Mode. Bypassing subwoofer crossover, as receiver is handling this. Set LFE OUT to Subwoofer. Set Center Channel delay. 1ms Used L/R Balance and master volume to achieve 75db SPL reading from both Front Mains. (At listening position) As measured on RS Digital SPL Meter. (Cool new toy) Then adjusted center, surrounds, and sub to match 75db. I set the Sub. to 0db on the receiver and used gain on the sub to adjust. Is this right? What is the Phase selector used for? I have it set to 0, is this correct? Is there anything that I am missing? Will REW benefit me at all? Thanks in advance for all the help. | ||||
|
| | |
| | |
| | #2 | ||||||
| Re: What else needs to be done? Quote:
Quote:
brucek | ||||||
|
| | #4 | |||||
| Re: What else needs to be done? Quote:
brucek | |||||
|