Hooking up a 0404?

[Danothemano]

Can someone explain to me how I am to connect the E-MU 0404 to my Receiver (Marantz 4001)? I've looked over the help notes but there are so many inputs and outputs on the 0404 that I don't know what to use. I already have the Radioshack meter on hand, but I am waiting to see what cables I need.

[brucek]

Simply use the unbalanced 1/4" TS phone jack output to the receiver and the unbalanced 1/4" TS phone jack input for the RS meter.

The soundcard cal will temporarily require a TS to TS cable for loopback.

brucek

[Danothemano]

brucek wrote:

Simply use the unbalanced 1/4" TS phone jack output to the receiver and the unbalanced 1/4" TS phone jack input for the RS meter.

The soundcard cal will temporarily require a TS to TS cable for loopback.

brucek

So I'd need two 1/4 to RCA right? I already have TS cables that are hooked up to my studio monitors so I could just use one of those temporarily.

[Wayne A. Pflughaupt]

Danothemano wrote:

So I'd need two 1/4 to RCA right?

Correct.

Regards,
Wayne

[Danothemano]

These would work, correct?

http://www.sweetwater.com/store/detail/CPR110

[Wayne A. Pflughaupt]

Yup...

Regards,
Wayne

[Danothemano]

Edit: Nevermind, I fixed it somehow by setting the 0404 to 96kHz on the soundcard and the windows settings and now it shows up in REW. Calibrated the soundcard, so all I need to do is pick up a couple of cables at radioshack tomorrow and measure my sub.