I have a calibration report, how to input this into REW?

**Cathan** · **02-20-09, 10:59 AM**

I had my EMC8000 calibrated and now have a paper test report. I assume the next step is to create a cal file using this information. After opening the EMC8000 cal file that is provided here, how the data is formatted isn't entirely clear. The Shack file has a lot more data then my test report. Should I just use Notepad to create a new file? Assuming so, is the format is frequency {space} +/-dB, one data set per line?

**brucek** · **02-20-09, 12:15 PM**

Quote:

Should I just use Notepad to create a new file? Assuming so, is the format is frequency {space} +/-dB, one data set per line?

Yep..........

**Cathan** · **02-20-09, 12:39 PM**

Thank you!

**BritInVA** · **02-23-09, 09:36 AM**

When I imported the microphone cal file I use frequency {tab} +/-dB

Is that OK or do I need to redo?

**brucek** · **02-23-09, 11:13 AM**

It's fine.

Simply look at the results when it's loaded on the REW graph by checking the meter/mic box.

**BritInVA** · **02-23-09, 11:30 AM**

Yep - reads into graph fine

Advertisement