Mark levinson 502 a/v preamplifier - Home Theater Forum and Systems -

Thread Tools
post #1 of 1 Old 04-20-09, 05:28 PM Thread Starter
Senior Shackster
Join Date: Jul 2008
Location: White Plains, New York
Posts: 526
Mark levinson 502 a/v preamplifier

I have t admit, I love ML components. Their amplifiers are some of the best available. This is their state of the art all world preamp, which replaces their 40 Media Console. But, i do have some reservations. At this level, 1.1 is not enough. 1.3a is the standard now. And most AV receivers, have it now........

Give me your views and opinions. Mark Levinson No. 502 AV Preamplifer Reviewed

* By: Jerry Del Colliano
* - Reviewer's System

* Category:
* AV Preamplifier Reviews, Equipment Reviews, Video Reviews

* Resources & Links:
* Analog Amplifier (Class A & AB)
* , Balanced Connection (XLR)
* , DTS
* , DTS ES (6.1)
* , DTS-HD Master Audio
* , HDMI
* , HDMI 1.1
* , HDMI Output
* , Mark Levinson

* September 16, 2008

In a world where the best-sounding audio material is copy-protected via HDMI, audiophiles have become so frustrated with the complexities of home theater (AV) preamps and Blu-ray systems that many are simply going retro. They are returning to systems that are based around or exclusively used a two-channel preamp just to keep the purity and simplicity of their sound on their un-copy-protected CD and even LP sources. This short-lived trend might start to die, thanks to the Mark Levinson No. 502 media console.

The Mark Levinson No. 502 AV preamp is the $35,000 replacement for the mighty Mark Levinson No. 40. It represents a major leap forward in terms of technology and integration. Gone is the two-chassis design. The new edition is a sleeker, six-HDMI input audio and video switching preamp that stands up to the audio demands of a true audiophile, while switching both audio and video the way Hollywood studios demand of a copy-protected Blu-ray driven world. Tremendous effort has gone into making the Mark Levinson No. 502 immune to outside interference and noise from other components, allowing this home theater monster to link to its audiophile brethren also in the Mark Levinson line-up. The graphical user interface (GUI) on the old No. 40 was excellent compared to other AV preamps and the No. 502 is even better. While it might not be an iPhone, this preamp can be set up by the end user if you want but, for $35,000, you could very well expect your Mark Levinson dealer to complete the install for you, as this is about as expensive an audio-video component as you can find.

High Points
The 502 packs audiophile sound while still having all the connections needed for today's modern home theater and distributed audio systems
Mark Levinson's customer service is topnotch and, in a world where putting all the pieces together in a complex home theater is like cracking some sort of sick code, it's nice to have somebody who cares and answers the phone. Try that with the big Asian companies when you can't get their copy-protected products to make a picture on your screen
The No. 502 is built to last forever with the types of materials and build quality you expect from a significant investment in your home theater system.

Low Points
HDMI 1.1 is two versions behind from the current standard. The Mark Levinson argument is that all of the current chipsets today convert the full digital audio to PCM inside the preamp already, so why not do it in your player and stick with a more stable HDMI 1.1 connection? Consumers who always want the latest and greatest, especially when spending $35,000, are having a hard time wrapping their minds around why it's better to take an older technology when they are spending the big money
The No. 502 isn't configured to be as upgradeable as the No. 40 physically. History proved the card system of the No. 40 didn't see that many upgrades, so perhaps the 502 will be more flexible when the story is all told on the unit thanks to software and firmware, but at $35,000, anyone would expect this unit to stay current for years to come.
Lack of HDMI 1.3 means that the Mark Levinson No. 502 cannot do Deep Color. Blu-ray players can't do this either, but this even better video technology is on the horizon and videophiles are atwitter over it.
To date, there is, amazingly, no matching Blu-ray player to go with the No. 502. Consumers are expected to plunk down $35,000 and then plug in a consumer-grade Samsung or Sony that costs $500 for their source. Harman needs to make a limited edition run of 500 players using someone else's chassis and put out an expensive, stable and good-sounding player that can play any and every disc out there, including Blu-ray, CD, DVD, DVD-Audio, SACD and others. If a tiny company like Goldmund can do it, a giant like Harman can do it. In fact, Harman's limited-edition idea was done with an audiophile CD player a few years ago by Mark Levinson. And yes, we all remember the Proceed PMDT. It's time to get over the fear, as wealthy people (not just the same old audiophiles) will want a total solution.

Even their most bitter competitors are saying the Mark Levinson No. 502 is the best AV preamp currently on the market at this time. As high-end companies struggle to get a grip on their own relevance in a market that is being driven by consumer-grade retail powerhouses like Costco and Wal-Mart, Mark Levinson has made a true statement with the 502 AV preamp. Do they need a matching Blu-ray player? Without question, if they want to woo the Patek Philippe-wearing, Marquis jet-flying, non-audiophile demographic. At the same time, can you do any better in making your legacy music collection sound its best while pumping in master-quality sound via HDMI? Not without a Mark Levinson No. 502 in your rig. Even with the most feature-rich Japanese AV preamps costing from $3,500 to $7,000, the sound is unfortunately lean. With the Mark Levinson No. 502, you truly pay for your performance but, without question, you get the best of both the worlds of audio and HD video - right now in your theater. The Mark Levinson No. 502 is the cutting edge of AV preamps.

deacongreg is offline  


levinson , mark , preamplifier

Quick Reply

Register Now



Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address



Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.


See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


For the best viewing experience please update your browser to Google Chrome