Lumagen Radiance / Radiance 20XX-21xx Firmware Updates - Page 2 - Home Theater Forum and Systems - HomeTheaterShack.com

Reply
 
Thread Tools
post #11 of 32 Old 08-26-14, 02:38 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 080114 Firmware Update

Release Notes

Fix for a configuration saving issue that didn't allow the "undo save" to work properly.

Also, another fix for working with the configuration utility.

Note the configuration utility was also just updated to version 1.8. as the earlier version was not downloading the CMS portion of the configuration to save on a PC for 21XX units. If you backed up your 21xx configuration earlier you should back it up again after performing this update and downloading the new 1.8 version of the configuration utility.

There were some improvements to the config utility as well. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
Sponsored Links
Advertisement
 
post #12 of 32 Old 08-29-14, 02:46 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 081514 Firmware Update

Release Notes

Added 17x17x17 CMS (4.913 Color Points) along with corresponding menu and rs232 command options.

Added option to enable Darbee enhancement for just 2d or just 3d sources.

If you back up your setup to a PC Be sure to download the new configuration (v1.8) utility from the Lumagen Utilities page to use with your Radiance 21xx. (Update time ~15 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #13 of 32 Old 08-30-14, 02:58 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance (XE/XE+/XE3D/XE/XE+/XE3D/Mini-3D/XD/XD3D) New 081514 Firmware Update

Release Notes

Added faster serial port IO to enable faster operation with calibration software. (Update time ~3 minutes @57k)

Download Link

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081514 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #14 of 32 Old 09-01-14, 02:34 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081614 Firmware Update

Release Notes

Added option to enable Darbee enhancement for just 2d or just 3d sources. (Update time ~15 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #15 of 32 Old 09-03-14, 02:36 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081714 Firmware Update

Release Notes

The audio configuration menu had lost the spdif/coax selectable options from 050114-081614 in 20xx models only. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #16 of 32 Old 09-03-14, 05:45 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 081814 Firmware Update

Release Notes

Location values for 17x17x17 gamut adjustment via the menu were off by 1 for a few locations due to a rounding error. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #17 of 32 Old 09-03-14, 09:33 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 20XX Series (2021, 2022, 2041, 2042) New 081814 Firmware Update

Release Notes

Location values displayed for 9x9x9 gamut adjustment via the menu were off by 1 for a couple locations due to a rounding error. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #18 of 32 Old 09-08-14, 04:52 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 082014 Firmware Update

Release Notes

Bugfix for configuring analog composite inputs (2143, 2144 only). The menu would show settings being made for these inputs without corresponding changes to the picture. (Update time ~3 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #19 of 32 Old 09-13-14, 05:04 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

LightSpace CMS 6.6.3.1972 (12 September 2014) Closed Beta

Light Illussion has released a Closed Beta Version of LightSpace CMS that supports the Lumagen 21xx uploading of 17-Point Cube 3D LUT Tables.

Because I don't have a Lumagen 21xx here to test it, If any LightSpace user with Lumagen 21xx need to test it, I can provide him the download link via a simple PM.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #20 of 32 Old 09-20-14, 05:04 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 235
Re: Lumagen Radiance / Radiance 20XX-21xx Firmware Updates

Lumagen Radiance 21XX Series (2123, 2124, 2143, 2144) New 091014 Firmware Update

Release Notes

Fix for a bug which under some circumstance could give strange colors in grayscale intermittently. (Update time ~15 minutes @57k)

Download Link


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
Reply

Bookmarks

Tags
20xx21xx , firmware , lumagen , radiance , updates

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome