Im new too

[sevans28]

HI MY NAME IS STEVE,AND I STARTED A SMALL HOME THEATER WITH A DENNON 2807,DEFINITIVE POWER CUBE 10" SUB AND SMALL CENTER,2 SPEAKERCRAFT 8" 125W Pivoting In-Ceiling Speaker FOR REARS AND 2 OLD CERWIN VEGAS 3-WAY 12"WOOFER (REPLACING THEM WITH DEFINITIVE BP 7004'S)FOR FLOORSTANDING,PS3 FOR BLUE RAY AND MY DISPLAY 32" OLEVIA WICH NEEDS TO BE UPGRADED TOO.I HAVE THE PS3 SET TO LINEAR PCM AND MY DENNON SAYS MULTI CHANNEL DOES THIS MEAN IM GETTING THE BEST AUDIO OUT OF THE DVDS AND BD?THANKS IN ADVANCE

[Sonnie]

Howdy sevans28 and welcome to the Shack!

We hope you find yourself hanging with us regularly...

---

Sonnie

[Mike P.]

Hi Steve and welcome to the Shack!

[eugovector]

sevans28 wrote:

I HAVE THE PS3 SET TO LINEAR PCM AND MY DENNON SAYS MULTI CHANNEL DOES THIS MEAN IM GETTING THE BEST AUDIO OUT OF THE DVDS AND BD?THANKS IN ADVANCE

Hi Steve,

Welcome to the shack. If you're using HDMI with your Denon, that should do it as long as your AVR supports DolbyTrueHD and the like. If your Denon does not have support for Dolby TrueHD and the like, you can set it to PCM, but you still need HDMI.

Also, and there's no easy way to say this, you might want to do something about your "Caps Lock" key

Once again, welcome.

Marshall

[mechman]

Welcome Steve!

[nova]

Hello Steve,
Welcome to the Shack.

[sevans28]

Thanks for the nice warm welcome

Welcome from one newbie to another.
Although I'm not sure what model Denon AVR you have, it sounds similar to the way I run my Onkyo 605, which also reads "multichannel" when playing Blu Rays.
When the PS3 is set to PCM, it will do the decoding and then send it on to your receiver. In an effort not to embarrass myself, I'll avoid spewing details and jargon I'm not completely familiar with and just say, I believe you are properly set up. (Assuming you're connected via HDMI.) In other words, I agree with what Marshall said a few posts ago.

[drdoan]

Welcome, Steve, Have fun, Dennis