Hi there,
actually i stumbled upon the shack whilst searching for real time analyzer tools ...
I am in High-End Stereo and so i own some older (5 years) digital preamp incorporating a very good (really) d/a stage including a room eq functionality, based on a win9x measurement software which uses an external microphone preamp a/d device.
it calculates parameters for fir filters which are then fed into the amp itself.
Not a simple solution as one could wish, but the result is very nice
So i sometimes play around a bit with measuring...
Usually i do not like surround systems - not pincipially - but because it is not easy to build and afford a surround system which sounds as good as a good stereo system
So until now i leave this part out and fumble around my simple stereo system
I listen to the described Preamp PD 1210 of T+A, fed by a dvdp/transport device with a nearly jitter free spdif out. My loudspeaker should be electrostatic ones again in near future as i 'lost' my old ones. Meanwhile speakers are KEF iQ3 which have the most bang for the buck i ever heard (not bass-bang). The system is driven by a bigger chinese Valve Amp giving 2*100 Watts by a sum of 8 KT88 Valves driven in low power mode. (As McIntosh would try to get more than 200Watts out of this)
cheers,
Michael
08-24-06, 07:47 AM
Advertisement 
