Black widow in australia - Home Theater Forum and Systems - HomeTheaterShack.com

 
Thread Tools
post #1 of 8 Old 04-10-14, 06:53 AM Thread Starter
Shackster
 
Join Date: Apr 2014
Posts: 10
Black widow in australia

Hi folks,

From Australia here. I have Epson TW TH9000W http://www.epson.com.au/products/pro...EH-TW9000W.asp

I am setting up my rumpus room, http://shaperweb.com/alfresco.jpg I am closing one side with concrete sheets and plaster inside. Other side will be Aluminium doors and glasses.

I dont want to get screen and limit myself in moving the projector and be cost effective. I have been going through many threads here, which was getting good review by users here. I would like to try the same setup and get guided through experts here on the process.

All the threads I have seen are for paints available in US, EU etc, can you guys guide me on what should be done here? Or if someone has done it in AU, share me the experience so that i can simplify that to guys in local store.

When i showed the below from http://en.wikipedia.org/wiki/Black_W...28paint_mix%29 Local store like bunnings and Masters didnt had a clue or idea.

Black Widow AU

(960ml) of “DULUX Wash & Wear Flat” tinted (PPG Taubmans color code: 427-2 Bermuda Beige) paint from Mitre 10 or Bunnings.
(240ml) of “Auto-Air Aluminium Base Fine” (code: 4101) paint from Createx Auto Air Colors.

Note: The new formulation Auto Air Aluminum requires a new base. Bermuda Beige will not work with the new formulation. More info coming...

Can you guys guide me?
r_m_shyam is offline  
Sponsored Links
Advertisement
 
post #2 of 8 Old 04-10-14, 07:23 AM Thread Starter
Shackster
 
Join Date: Apr 2014
Posts: 10
Re: Black widow in australia

should i have to buy?

4101 Auto-Air Aluminum Base (Fine) from http://www.airbrushwarehouse.com.au/...nium-base.html
r_m_shyam is offline  
post #3 of 8 Old 04-13-14, 01:49 AM
Shackster
andygreen
 
Join Date: Jul 2013
Posts: 9
I have the old auto air silver paint if you are interested. .I live in adelaide
andygreen is offline  
 
post #4 of 8 Old 04-13-14, 09:25 PM Thread Starter
Shackster
 
Join Date: Apr 2014
Posts: 10
Re: Black widow in australia

Quote:
mechman wrote: View Post
What projector are you going to use? What are you going to paint?
I have Epson TW TH9000W http://www.epson.com.au/products/pro...EH-TW9000W.asp This is named as epson e5030 I think.
r_m_shyam is offline  
post #5 of 8 Old 04-13-14, 09:26 PM Thread Starter
Shackster
 
Join Date: Apr 2014
Posts: 10
Re: Black widow in australia

Quote:
andygreen wrote: View Post
I have the old auto air silver paint if you are interested. .I live in adelaide
I would be interested. But until i get the complete answer of what to mix with that, I dont know how to move forward.
r_m_shyam is offline  
post #6 of 8 Old 04-13-14, 09:48 PM
Shackster
andygreen
 
Join Date: Jul 2013
Posts: 9
Re: Black widow in australia

Ive already spoken to 2 bunnings in adelaide and they found the taubmans mix on their computers no worries,you are better off ringing around another bunnings store or just another paint store to make sure they can do it ,2 litres Dulux of ellen half (PO9F1H) flat water base is the other option which might be easier to find, I have 480 mls of createx aluminium fine base to sell which you would mix with 2 litres paint which would give you enough for 3 or more coats
andygreen is offline  
post #7 of 8 Old 04-15-14, 01:34 PM
HTS Moderator
 
Join Date: Sep 2012
Location: Greece
Posts: 519
Re: Black widow in australia

Quote:
r_m_shyam wrote: View Post
I have Epson TW TH9000W http://www.epson.com.au/products/pro...EH-TW9000W.asp This is named as epson e5030 I think.
How big is your screen?
Is Epson calibrated?
How many hours on your lamp?
Using eco or high mode?


Just note that a calibrated 9000 emits ~700 lumens.
Yiannis1970 is offline  
post #8 of 8 Old 04-22-14, 07:22 PM Thread Starter
Shackster
 
Join Date: Apr 2014
Posts: 10
Re: Black widow in australia

Quote:
Yiannis1970 wrote: View Post
How big is your screen?
Is Epson calibrated?
How many hours on your lamp?
Using eco or high mode?


Just note that a calibrated 9000 emits ~700 lumens.
My screen is 130".
My Epson not calibrated. How to do that?
Lamp hours 1350.
Usually in ECO mode, but once in a month or so, I use normal.

Really interested to know how to calibrate Epson 9000? Can you guide?
r_m_shyam is offline  
Reply

Bookmarks

Tags
australia , black , widow

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome