Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY! - Page 6 - Home Theater Forum and Systems - HomeTheaterShack.com

Reply
 
Thread Tools
post #51 of 138 Old 01-22-07, 07:42 PM Thread Starter
Elite Shackster
 
Sonnie's Avatar
 
Join Date: Apr 2006
Location: L.A. (Lower Alabama)
Posts: 22,577
My System
Re: Revised Firmware V1.4 for the DSP1124P

Just use a drill and if necessary a hammer... leave it plugged up for an extra surge to burst it loose...
Sonnie is offline  
Sponsored Links
Advertisement
 
post #52 of 138 Old 01-22-07, 08:51 PM
Senior Shackster
jagman
 
Join Date: Jul 2006
Location: Sacramento, CA
Posts: 342
Re: Revised Firmware V1.4 for the DSP1124P

Is the firmware necessary if you don't use the midi jacks?
jagman is offline  
post #53 of 138 Old 01-22-07, 09:04 PM
Elite Shackster
brucek
 
Join Date: Apr 2006
Posts: 7,514
Re: Revised Firmware V1.4 for the DSP1124P

No...........
brucek is offline  
 
post #54 of 138 Old 01-23-07, 02:48 PM
Senior Shackster
lovingdvd
 
Join Date: Jan 2007
Posts: 246
Re: Revised Firmware V1.4 for the DSP1124P

I was planning to pick up an 1124P from a local retailer. Am I definitely going to hit this bug with the midi (wanting to use REW to send filters/EQ to it), or does the issue only affect some units? Seems like this issue recently came up, so what changed that broke this (seems like many people in the past did not have this issue?)?
lovingdvd is offline  
post #55 of 138 Old 01-24-07, 04:25 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P

Can you update the title of this thread to say "revised Firmware v1.4 for V1.3 DSP1124P".

I'm new here, but if I read the threads correctly the V1.0-v1.2 DSP1124P BFDs don't have a problem between the Midi interface and REW do they? I have an older BFD and was thinking "oh " I need to upgrade the thing if I want to use a midi interface to store the filter values...

thanks
Dan
Lucky7! is offline  
post #56 of 138 Old 01-24-07, 05:04 PM Thread Starter
Elite Shackster
 
Sonnie's Avatar
 
Join Date: Apr 2006
Location: L.A. (Lower Alabama)
Posts: 22,577
My System
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Hi Dan and welcome to the Shack!

Good idea... and done!
Sonnie is offline  
post #57 of 138 Old 01-30-07, 01:44 PM
Senior Shackster
lovingdvd
 
Join Date: Jan 2007
Posts: 246
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

I got my 1.4 chip but not in a hurry to install it. I've gotten used to manually entering the data into the BFD and figure I might as well save the $40 on the MIDI cable... still undecided though.

BTW, after I replace the chip will I need to reprogram all my filters in the BFD? Or is that stored in a different chip in the BFD?
lovingdvd is offline  
post #58 of 138 Old 01-31-07, 06:27 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

One thing I found that eases the replacement is to remove the pin cable to the right. Just pop up the glue, remove the pin connector and then you have a "whole heaping passle" of room. I also use a hot glue gun to put a dab of glue on both connections.
Lucky7! is offline  
post #59 of 138 Old 02-12-07, 05:06 AM
New Member
akardash
 
Join Date: Sep 2006
Location: Adelaide
Posts: 3
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Hi All!
First of all I would like to thank everyone on this forum for the effort you, guys made to solve this DSP1124P 1.3 MIDI problem!
Finally, I've received new eprom with 1.4 firmware (thanks Steph from www.Hobbyroms.com) and swapped out the ver 1.3 chip.
(I'm in Australia and it worked out very well for me, it took 10 days for the parcel to arrive)

Now I'm very happy to have my 1124 unit fully functional.

Regards,
Andriy.
akardash is offline  
post #60 of 138 Old 02-12-07, 12:59 PM
Shackster
Joe
 
Join Date: Feb 2007
Location: CT
Posts: 73
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

OK, I tried to start a separate thread since it really is a different issue BUT did not get a definitive answer.
My question is: What is the difference from V1.0 to 1.1 to 1.2 to 1.3?
The difference from 1.3 to 1.4 is well documented here - I'll go out on a limb and say the only difference is that MIDI is enabled right???
But, I really would like to know of the differences from the other versions. Anyone?
TIA
blownrx7 is offline  
Reply

Bookmarks

Tags
dsp1124p , firmware , revised , v13 , v14

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome