Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY! - Page 9 - Home Theater Forum and Systems - HomeTheaterShack.com

Reply
 
Thread Tools
post #81 of 138 Old 04-19-07, 12:34 PM
Shackster
Joe
 
Join Date: Feb 2007
Location: CT
Posts: 73
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Quote:
My impression is that 1.0, 1.1, 1.2 should work just fine without mod, and 1.3 needs the mod. Is this a correct assumption?
Shawn,
Your assumption is correct. I asked what the differences were from 1.0 to 1.1 and 1.2 and no one really knew (of course I should have asked Behringer). No one noticed a difference either at any rate.
I'm betting that any changes affected the original target audience (PA system guys who needed to kill feedback issues)
That being said, it seems the chances of finding anything but 1.3 in the stores is pretty low. YOu'd have to find a place that did not move a lot of stock to find the older versions.
blownrx7 is offline  
Sponsored Links
Advertisement
 
post #82 of 138 Old 04-19-07, 03:23 PM
Shackster
slidell
 
Join Date: Jan 2007
Location: Slidell, La.
Posts: 19
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Shawn, if you absolutely need the filters working via midi then do as others suggest and contact Behringer. Other than midi, my 1.3 chipped 124 works just fine.
slidell is offline  
post #83 of 138 Old 04-19-07, 09:48 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

arrived in the mail today. took 5 mins to open up, scrape the glue off and put the chip in before.

if you haven't done this before, make sure you look for the notch on the eprom so you orient it the right way, and make sure you straighten up the pins so it lines up in the sockets.

I really appreciate the terrific customer service from behringer. wish all companies had service like that.
Lucky7! is offline  
 
post #84 of 138 Old 04-28-07, 07:04 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Wow...I just saw this thread. I have a 1124p that I have had for a bit but never got around to setting it up. I started to play with it this weekend and found this thread. I aways planned on using the midi support so I quickly checked my version after reading through all the comments.

It turns out mine is version 1.0. The production date of the unit seems to be Feb '05. I was hoping for version 1.2 just so I wouldn't have to go the extra steps. However, now I wonder if sticking with version 1.0 is just as bad. It may have the midi support bur what else might they have fixed from 1.0 to 1.4.
Lucky7! is offline  
post #85 of 138 Old 06-07-07, 05:44 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Quote:
slidell wrote: View Post
Same here. Just got e-mail yesterday saying the 1.4 chip is in the mail
I posted mine on Sunday evening (6/4/07), four days later and still no reply. I'll wait another day before I ping them gently for a response.
Lucky7! is offline  
post #86 of 138 Old 07-04-07, 07:26 AM
Shackster
Sparks
 
Join Date: Jun 2007
Location: Oklahoma City
Posts: 26
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

I requested my revised Eprom a little over 3 weeks ago from Behringer Tech Support. Behringer Customer Service was very prompt to reply but it appears the Eprom will not be available for 6-8 weeks. It would appear they were not ready for the rush of requests on this issue. They did refer me to a place where I could "buy" the Eprom. They apparently were serious.

Making a customer wait 6-8 weeks for correction of a quality issue as simple as an Eprom is not good....

Anyone else having this problem or have you been able to get the Eprom via some other way?

Last edited by Testpattern; 07-07-07 at 01:10 PM.
Testpattern is offline  
post #87 of 138 Old 07-11-07, 07:22 PM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

...and they're in stock again. woot.

Response (Chris P.)
11/07/2007 11.24 AM
Dear Ward,

We finally received the V1.4 EPROMS for the DSP1124P. We will mail it to the following address.
Lucky7! is offline  
post #88 of 138 Old 07-12-07, 08:13 AM
Shackster
Sparks
 
Join Date: Jun 2007
Location: Oklahoma City
Posts: 26
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

I've been working with Behringer for over three weeks concerning them supplying a corrected Eprom. They're telling me 6-8 weeks. Or I could go to someone and pay them to burn an Eprom....

What a bunch of .... it's their problem but they appear really laid back about doing anything about it.
Testpattern is offline  
post #89 of 138 Old 07-22-07, 07:30 AM
Senior Shackster
7
 
Join Date: Jan 2008
Posts: 790
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

I am ver. 1.0 should I leave it alone or upgrade ?
I am just getting into this so have a major learning curve ...
Just wondering if I need to upgrade to 1.4 I will be using midi when I get that figured out. My take on this thread is I am OK as is ..... that only if I went or had 1.3 I would need the upgrade.

I will be going with a 2496 some day though as I only need the two presets

I will use a house curve and a flat one and use bypass
Lucky7! is offline  
post #90 of 138 Old 07-22-07, 07:39 AM
Elite Shackster
brucek
 
Join Date: Apr 2006
Posts: 7,514
Re: Revised Firmware V1.4 for the DSP1124P with V1.3 ONLY!

Quote:
I am ver. 1.0 should I leave it alone or upgrade ?
Leave it... version 1.0 is fine..

brucek
brucek is offline  
Reply

Bookmarks

Tags
dsp1124p , firmware , revised , v13 , v14

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome