X4000 crossovers do not work? - Home Theater Forum and Systems - HomeTheaterShack.com

Reply
 
Thread Tools
post #1 of 31 Old 03-03-15, 02:31 PM Thread Starter
Elite Shackster
 
Talley's Avatar
 
Join Date: Dec 2010
Location: Houston Tx
Posts: 1,295
X4000 crossovers do not work?

I noticed the other day I had my amp turned off and a movie was playing and I could hear a bunch of higher frequencies (100-250hz) out of my sub which is really weird because the crossover in the X4000 is set to 60hz. I went over to the HSU and switched the crossover switch to "IN" to turn it on and instantly the frequencie levels dropped to the 90 it was set to... I then moved it down to 30 and it took it out all the way down to there.

So I turned the switch back to "OUT" to allow full frequencies to go to the sub and started to play with the speaker config and no matter what I did nothing worked. In the speaker config I ahd the crossover set to "All" and the speakers set to small but no matter if I selected 120, 40 or 250 it was all the same.

Can someone verify they get the same results?... I would think it would cut the frequencies out like it should.

Master Electrician

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

XPA-7 & Krell Showcase 7 | XMC-1 | SVS Ultra Tower system | HSU VTF-15H MK2 | BenQ W1070 | Jamestown 135"
Talley is offline  
Sponsored Links
Advertisement
 
post #2 of 31 Old 03-03-15, 03:07 PM
Elite Shackster
 
tonyvdb's Avatar
Tony
 
Join Date: Sep 2007
Location: Edmonton, Alberta, Can
Posts: 15,054
My System
Re: X4000 crossovers do not work?

How are you running the BluRay player to the receiver, HDMI? do you have the receiver set to direct?

Home theater:
Onkyo 805, Yamaha YDP2006EQ, Samson Servo 600 amp
3 EV Sentry 500 monitors across the front, 4 Mission 762i's Surrounds, SVS PB13U sub, Panasonic BDT220, Harmony 1100, Nintendo WiiU
Panasonic PT-AE8000 on a 120" 2,35:1 fixed screen

Living room system:
Sherwood/Newcastle R972, Mission 765's, SVS SBS02's, A/D/S MS3u sub, Yamaha YDG2030EQ
Yamaha KX-393 Tape deck, CDC 805 CD changer, Panasonic BD60, Sony turntable PS-T20
Panasonic TC-P50ST60, HD-PVR & WDTV Live, Harmony 900

tonyvdb is offline  
post #3 of 31 Old 03-03-15, 03:31 PM Thread Starter
Elite Shackster
 
Talley's Avatar
 
Join Date: Dec 2010
Location: Houston Tx
Posts: 1,295
Re: X4000 crossovers do not work?

Quote:
tonyvdb wrote: View Post
How are you running the BluRay player to the receiver, HDMI? do you have the receiver set to direct?
HDMI from bluray to receiver and the audio was set to DTS-MA so it uses the audyssey corrections. Direct it bypasses audyssey.

Master Electrician

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

XPA-7 & Krell Showcase 7 | XMC-1 | SVS Ultra Tower system | HSU VTF-15H MK2 | BenQ W1070 | Jamestown 135"
Talley is offline  
 
post #4 of 31 Old 03-03-15, 03:50 PM
Elite Shackster
 
tonyvdb's Avatar
Tony
 
Join Date: Sep 2007
Location: Edmonton, Alberta, Can
Posts: 15,054
My System
Re: X4000 crossovers do not work?

Quote:
Talley wrote: View Post
HDMI from bluray to receiver and the audio was set to DTS-MA so it uses the audyssey corrections. Direct it bypasses audyssey.
Ok thats correct,
and your sure that you have Audyssey engaged?

Home theater:
Onkyo 805, Yamaha YDP2006EQ, Samson Servo 600 amp
3 EV Sentry 500 monitors across the front, 4 Mission 762i's Surrounds, SVS PB13U sub, Panasonic BDT220, Harmony 1100, Nintendo WiiU
Panasonic PT-AE8000 on a 120" 2,35:1 fixed screen

Living room system:
Sherwood/Newcastle R972, Mission 765's, SVS SBS02's, A/D/S MS3u sub, Yamaha YDG2030EQ
Yamaha KX-393 Tape deck, CDC 805 CD changer, Panasonic BD60, Sony turntable PS-T20
Panasonic TC-P50ST60, HD-PVR & WDTV Live, Harmony 900

tonyvdb is offline  
post #5 of 31 Old 03-03-15, 04:07 PM Thread Starter
Elite Shackster
 
Talley's Avatar
 
Join Date: Dec 2010
Location: Houston Tx
Posts: 1,295
Re: X4000 crossovers do not work?

Quote:
tonyvdb wrote: View Post
Ok thats correct,
and your sure that you have Audyssey engaged?
Yup... even says so on the LCD panel.

So your saying this is not normal that as I adjust the crossover and save it and back out of the menu it should change to the sub... because this was not the case at all.

I wonder if my crossovers even work at all.

Ohhh... I'll test it tonight and run REW tests and just flip the switch on the sub and do it that way and see back and forth tests.

Master Electrician

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

XPA-7 & Krell Showcase 7 | XMC-1 | SVS Ultra Tower system | HSU VTF-15H MK2 | BenQ W1070 | Jamestown 135"
Talley is offline  
post #6 of 31 Old 03-03-15, 04:10 PM
Elite Shackster
 
tonyvdb's Avatar
Tony
 
Join Date: Sep 2007
Location: Edmonton, Alberta, Can
Posts: 15,054
My System
Re: X4000 crossovers do not work?

I am not sure what is going on. If you have the speakers set to small with a crossover on all of them set to 60Hz there should be nothing higher than that getting to the sub. Are you certain you have the sub plugged into the #1 "sub out" pre out?

Home theater:
Onkyo 805, Yamaha YDP2006EQ, Samson Servo 600 amp
3 EV Sentry 500 monitors across the front, 4 Mission 762i's Surrounds, SVS PB13U sub, Panasonic BDT220, Harmony 1100, Nintendo WiiU
Panasonic PT-AE8000 on a 120" 2,35:1 fixed screen

Living room system:
Sherwood/Newcastle R972, Mission 765's, SVS SBS02's, A/D/S MS3u sub, Yamaha YDG2030EQ
Yamaha KX-393 Tape deck, CDC 805 CD changer, Panasonic BD60, Sony turntable PS-T20
Panasonic TC-P50ST60, HD-PVR & WDTV Live, Harmony 900

tonyvdb is offline  
post #7 of 31 Old 03-03-15, 04:17 PM Thread Starter
Elite Shackster
 
Talley's Avatar
 
Join Date: Dec 2010
Location: Houston Tx
Posts: 1,295
Re: X4000 crossovers do not work?

99% positive but will double check tonight. I have from sub 1 to the white rca on the HSU is the connection.

I never noticed before because I typically have the crossover switch on the sub set to IN and it's set to 90 just as a second form of HPF protection. But when I was testing REW I turned it off to get a full sweep and forgot to change it back and I didn't notice till I turned the amp off first and the sub was still playing and you could literally hear the male voices (the low part) through the sub which you don't want.

Master Electrician

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

XPA-7 & Krell Showcase 7 | XMC-1 | SVS Ultra Tower system | HSU VTF-15H MK2 | BenQ W1070 | Jamestown 135"
Talley is offline  
post #8 of 31 Old 03-03-15, 04:21 PM
Elite Shackster
 
tonyvdb's Avatar
Tony
 
Join Date: Sep 2007
Location: Edmonton, Alberta, Can
Posts: 15,054
My System
Re: X4000 crossovers do not work?

Are you sure that you have the centre channel set to small, 60Hz as well?

Home theater:
Onkyo 805, Yamaha YDP2006EQ, Samson Servo 600 amp
3 EV Sentry 500 monitors across the front, 4 Mission 762i's Surrounds, SVS PB13U sub, Panasonic BDT220, Harmony 1100, Nintendo WiiU
Panasonic PT-AE8000 on a 120" 2,35:1 fixed screen

Living room system:
Sherwood/Newcastle R972, Mission 765's, SVS SBS02's, A/D/S MS3u sub, Yamaha YDG2030EQ
Yamaha KX-393 Tape deck, CDC 805 CD changer, Panasonic BD60, Sony turntable PS-T20
Panasonic TC-P50ST60, HD-PVR & WDTV Live, Harmony 900

tonyvdb is offline  
post #9 of 31 Old 03-03-15, 04:32 PM Thread Starter
Elite Shackster
 
Talley's Avatar
 
Join Date: Dec 2010
Location: Houston Tx
Posts: 1,295
Re: X4000 crossovers do not work?

Quote:
tonyvdb wrote: View Post
Are you sure that you have the centre channel set to small, 60Hz as well?
I changed all speakers to large and then to 60hz... to 40... to 120.... everything was the same. even messing with the LFE crossover.

Master Electrician

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

XPA-7 & Krell Showcase 7 | XMC-1 | SVS Ultra Tower system | HSU VTF-15H MK2 | BenQ W1070 | Jamestown 135"
Talley is offline  
post #10 of 31 Old 03-03-15, 04:36 PM
Elite Shackster
 
tonyvdb's Avatar
Tony
 
Join Date: Sep 2007
Location: Edmonton, Alberta, Can
Posts: 15,054
My System
Re: X4000 crossovers do not work?

I wonder if you need to do a hard reset of the receiver and try again. Something is not right.

Turn off the power, wait
While turning the power back on hold the "Info" and "Back" buttons simultaneously. the display will flash on and off if successful.
You will then have to redo everything from scratch.

But first make sure you have the sub plugged into the sub #1 out in the pre out section.

Home theater:
Onkyo 805, Yamaha YDP2006EQ, Samson Servo 600 amp
3 EV Sentry 500 monitors across the front, 4 Mission 762i's Surrounds, SVS PB13U sub, Panasonic BDT220, Harmony 1100, Nintendo WiiU
Panasonic PT-AE8000 on a 120" 2,35:1 fixed screen

Living room system:
Sherwood/Newcastle R972, Mission 765's, SVS SBS02's, A/D/S MS3u sub, Yamaha YDG2030EQ
Yamaha KX-393 Tape deck, CDC 805 CD changer, Panasonic BD60, Sony turntable PS-T20
Panasonic TC-P50ST60, HD-PVR & WDTV Live, Harmony 900


Last edited by tonyvdb; 03-03-15 at 04:49 PM.
tonyvdb is offline  
Reply

Bookmarks

Tags
crossovers , work , x4000

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome