Home Theater Forum and Systems - HomeTheaterShack.com - Reply to Topic
Thread: Bad convergence chips: Is it possible resistors aren't affected? Reply to Thread
Title:
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
10-20-08 12:46 PM
Dave610
Re: Bad convergence chips: Is it possible resistors aren't affected?

Thanks lcaillo, I can now go ahead and order the Hitachi kit X480293 (X480295 appears to be out of stock at Tritronics). Thank you so much for sharing your knowledge, especially the convergence thread. Can't tell you how much I appreciate the info, our local service company would probably charge about $800 to swap boards - they want $130 just to turn on the set and look at the screen!
10-20-08 02:05 AM
lcaillo
Re: Bad convergence chips: Is it possible resistors aren't affected?

Yes, it is quite possible to have a bad IC and all of the resistors undamaged. In fact, on the Pioneer sets this is not unusual. IIRC, the convergence supply fuses may be glass fuses on that set. Just be sure to check the resistors with the ICs removed and the yokes disconnected.



10-19-08 11:55 PM
Dave610
Bad convergence chips: Is it possible resistors aren't affected?

Is it possible NOT to have burnt/open resistors when a STK goes bad? The BV channel stopped working on my set, resulting in severe vertical pincushion of the blue.

I'm about to order the recommended STK394-160's for my 8 yr old Pioneer PRO610HD, and decided to check all the output resistors on the conv. amp, by desoldering one end of each. All checked out okay, some maybe .1 or .2 ohm out of tolerance (the meter I used doesn't have a zero-adjust option, so I had to subtract .3 ohm from actual reading.) No problems with soldered connections, apparently this board was repaired at one time (service company swapped boards under warranty for non-related issue), key solder points look great. All components on conv. amp and digital conv. boards look brand-new, nothing obviously wrong. BTW, can't seem to find any pico fuses on this set so far.

Thank you for your response.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!

 


For the best viewing experience please update your browser to Google Chrome