Home Theater Forum and Systems - HomeTheaterShack.com - Reply to Topic

Thread: How to integrate 2 different types of subs?? Reply to Thread
Title:
Message:
Post Icons
You may choose an icon for your message from the following list:
 

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










  Additional Options
Miscellaneous Options

  Topic Review (Newest First)
09-03-12 12:22 AM
ellisr63
Re: How to integrate 2 different types of subs??

How about putting one of the eights in a corner and one of the twelves in another corner and the other two in the open? Then calibrating them with only one hooked up at a time. Once you have them each individually calibrated then hook them all up and adjust the overall level from your processor.
09-02-12 07:14 PM
epereira
Re: How to integrate 2 different types of subs??

I have two Klipsch KW-120-THX subwoofers which I place under the L/C Klipsch KL-650-THX speakers. I also have a SVS PC-12 Ultra which is in a corner of the room to help balance out the bass. Room treatments are by GIK Acoustics. Thus far, I have used a SVS AS-EQ1 for bass management but am moving to a Audysses MultEQ XT32 capable processor and will be ditching the SVS AS-EQ1 (a fantastic unit, by the way).
06-25-12 11:11 PM
John-180
Re: How to integrate 2 different types of subs??

Ok. So can I run auto calibration after I hook all 4 subs up, and will it flatten that boomy response on it's own?? or do I have to find it myself?? It always sets it to a flat response when I auto calibrate. This may sound like a silly question to you, but I'm not sure if it changes any of the eq points or just the distance, and speaker levels?
06-25-12 10:44 PM
GranteedEV
Re: How to integrate 2 different types of subs??

Quote:
I was thinking about the 8" in the corners and the 12" out a bit to keep the boom out of the 12 and put some in the 8 to try and bridge the gap???
Don't consider the corner to be adding boom... consider it to be adding headroom that can be equalized back to flat... you just need to equalize the inherent response boom.

Quote:
Can I just set my crossover point alot lower on the 12's and higher on the 8's to keep some of the boom out of the 12's? They just don't sound that good past 65 or so... or down past 35. My 8's can go down to 28 or so and sound good, and of course go to 80 no problem.
It's a pretty narrow passband (1 octave).... You will need a crossover to implement this filter such as the behringer DCX2496 or MiniDSP.
06-25-12 10:16 PM
John-180
Re: How to integrate 2 different types of subs??

Thanks for the response. I just skimmed the link you left.. Wooo That is alot to absorb! I am familiar with a tiny bit of it, but have never looked into it at any depth. I was thinking about the 8" in the corners and the 12" out a bit to keep the boom out of the 12 and put some in the 8 to try and bridge the gap??? Can I just set my crossover point alot lower on the 12's and higher on the 8's to keep some of the boom out of the 12's? They just don't sound that good past 65 or so... or down past 35. My 8's can go down to 28 or so and sound good, and of course go to 80 no problem.
06-25-12 09:47 PM
GranteedEV
Re: How to integrate 2 different types of subs??

Quote:
John-180 wrote: View Post
I have a Yamaha 7.1 reciever. My current setup is all Definitive Technology speakers... BP-08 Towers, CLR 2002 center, and 4 BP 1.2x for surrounds. Now I currently run 2 Pro Sub 60 8" subs up front next to my mains. I would like to add 2 12" MTX for some volume. I have compared the 2 Definitive's vs. the 2 MTX 12" and of course the Definitives sound better.... but I did like the intensity of the 12" MTX. Is there a way to use both sets and get the best of both worlds??? Good sound, with a big boom when I want it... Thanks for any help and/or advice.
For the most part it should be possible, assuming that you're able to equalize the global response to a curve that appeals to you. You may have to use the 8" sub subs as fill subs placed close to you with their decibel levels reduced compared to the 12" subs placed in corners.
06-25-12 05:29 PM
John-180
How to integrate 2 different types of subs??

I have a Yamaha 7.1 reciever. My current setup is all Definitive Technology speakers... BP-08 Towers, CLR 2002 center, and 4 BP 1.2x for surrounds. Now I currently run 2 Pro Sub 60 8" subs up front next to my mains. I would like to add 2 12" MTX for some volume. I have compared the 2 Definitive's vs. the 2 MTX 12" and of course the Definitives sound better.... but I did like the intensity of the 12" MTX. Is there a way to use both sets and get the best of both worlds??? Good sound, with a big boom when I want it... Thanks for any help and/or advice.

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!

 


For the best viewing experience please update your browser to Google Chrome