Home Theater Forum and Systems - HomeTheaterShack.com

Home Theater Forum and Systems - HomeTheaterShack.com (https://www.hometheatershack.com/forums/)
-   Ported Subwoofer Build Projects (https://www.hometheatershack.com/forums/ported-subwoofer-build-projects/)
-   -   Sonotube sub build x2 18hz (Peerless) (https://www.hometheatershack.com/forums/ported-subwoofer-build-projects/35837-sonotube-sub-build-x2-18hz-peerless.html)

BuddahX 11-26-10 05:25 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

these didn't have a film. They been sitting in the rafters at my work for a while. There's four left. Unless when the got that job that needed these they pulled off the film off of all of them I'm not too sure. or its still on it. I thoroughly cleaned the dust off with a 120 PSI air compressor and a brush and rag. Didn't notice a film of any kind. you got me all worried now lol.

BuddahX 11-26-10 05:32 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

Think that's the film?? I didn't know they had a film. all the sonotube builds I watched I never herd about the film. if its in there think it will compromise anything?
http://i870.photobucket.com/albums/a...s/SDC11613.jpg
http://i870.photobucket.com/albums/a...s/SDC11612.jpg
http://i870.photobucket.com/albums/a...s/SDC11610.jpg
http://i870.photobucket.com/albums/a...s/SDC11611.jpg

Mike P. 11-27-10 03:41 AM

Re: Sonotube sub build x2 18hz (Peerless)
 

It's hard to say by looking at the pics. Try and get under it with a sharp knife point, you'll know it's the release film if you can peel it off. The problem with the release film is most glues won't stick to it.




BuddahX 11-28-10 01:54 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

Its not wanting to come off and the glue bond is good on the brace so Looks like im in luck. :) Went to my buddy's house used is router for top and bottom plates. wanted a good circle with a rounded edge. Parts come in tuesday... yay.

http://i870.photobucket.com/albums/a...s/SDC11617.jpg
http://i870.photobucket.com/albums/a...s/SDC11614.jpg
http://i870.photobucket.com/albums/a...s/SDC11616.jpg

BuddahX 12-01-10 08:55 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

Dry fit the ports. Going to flush mount them.
http://i870.photobucket.com/albums/a...s/SDC11625.jpg
http://i870.photobucket.com/albums/a...s/SDC11626.jpg
Flared port just pass the center support.
http://i870.photobucket.com/albums/a...s/SDC11627.jpg
24 aluminum spacers I cut today for the top and bottom plates. Going to Polish them this weekend.
http://i870.photobucket.com/albums/a...s/SDC11628.jpg

BuddahX 12-04-10 10:47 AM

Re: Sonotube sub build x2 18hz (Peerless)
 


favelle 12-04-10 03:25 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

Wow, great thread! Hope you get them up and running soon!

BuddahX 12-04-10 08:26 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

thanx man.. Still be a few weeks waiting on a quote for some glass and need to order the metal sheet to wrap it with.
http://i870.photobucket.com/albums/a...s/SDC11649.jpg
http://i870.photobucket.com/albums/a...s/SDC11652.jpg

BuddahX 12-07-10 08:51 PM

Re: Sonotube sub build x2 18hz (Peerless)
 

cleaned up what will be the spacers for the top and bottom plates.
http://i870.photobucket.com/albums/a...s/SDC11703.jpg

BuddahX 12-08-10 06:29 PM

Re: Sonotube sub build x2 18hz (Peerless)
 



All times are GMT -5. The time now is 11:15 PM.

Powered by vBulletin
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.

Copyright ©2006 - 2019, Home Theater Shack, LLC.


vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.

 


For the best viewing experience please update your browser to Google Chrome