No sound from inuke 3000 - Home Theater Forum and Systems - HomeTheaterShack.com

 
Thread Tools
post #1 of 3 Old 07-16-15, 08:07 PM Thread Starter
Shackster
 
Join Date: Dec 2012
Posts: 6
No sound from inuke 3000

I am using input a on the inuke. I have a Rica to 3.5 to 1/4 adapter. Bought a speakon cable and cut one end off the run speaker wire to the sub. The sub has no output at all. If I unplug the 1/4" I get a pop. I think I have no out put from the receiver or something hooked up wrong. Help please....I'm getting frustrated.
carver0267 is offline  
Sponsored Links
Advertisement
 
post #2 of 3 Old 07-16-15, 08:51 PM
HTS Senior Moderator
 
Wayne A. Pflughaupt's Avatar
 
Join Date: Apr 2006
Location: Corpus Christi, Texas
Posts: 9,166
Send a message via Yahoo to Wayne A. Pflughaupt
Re: No sound from inuke 3000


Not enough information. I have no idea what a Rica is. Are you running the amp stereo, parallel (aka mono) or bridged? That will determine the proper Speakon jack to use, and how it should be wired. Also if you’re using a 3.5 mm stereo to 1/4" stereo adapter, and are using a cable with mono (TS) plug ends between the adapter and the amp, that won’t work.

Regards,
Wayne A. Pflughaupt



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
|
To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.

Wayne A. Pflughaupt is offline  
post #3 of 3 Old 08-28-15, 08:54 AM
Shackster
 
Join Date: Jul 2015
Posts: 6
Re: No sound from inuke 3000

I'm a bit lost on your RCA to 3.5 to adapter.
I'm not sure which output you are trying to use.
If you were trying to use your subwoofer preamp out it's a mono single.
Your 3.5mm to are probably both stereo.
You may only be getting half of the signal you need for input.

I think your best bet would be to buy some premade cables.
These are the cables I am using for my Inuke 3000dsp.
I bought mine from Amazon. If you do a search the cables in quotes they should come up for you.

You may have a single subwoofer preamp out from your AV Receiver.
You could try something like this:
"Monoprice 104777 6-Feet Premier Series XLR Male to RCA Male 16AWG Cable"
This cable would run from the RCA subwoofer preamp out to the Inuke 3000 input.
That would fix the mono to stereo problems you may be having with your current setup.

Speakon can have more than a single set of conductors in it.
How many sets of conductors does the one you cut up have in it?
I used a simple 2 conductor (2 Pole) Speakon cable to a 2 conductor banana clip.
"Conquest Sound N2B16 6 6-Foot 2 Pole Speakon to Banana"

Hope this helps!
Quaddragon is offline  
Reply

Bookmarks

Tags
3000 , inuke , sound

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome