Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000 - Page 42 - Home Theater Forum and Systems - HomeTheaterShack.com
Reply
 
Thread Tools
post #411 of 425 Old 10-31-14, 08:02 PM
Shackster
 
Join Date: Oct 2014
Location: Minnesota
Posts: 9
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

I just bought a NU6000DSP for my subwoofers. I have it all setup and when I have the power triggered through a smart strip, I am getting a loud turn-off pop on channel B only. Even with the input cables unplugged, channel B pops. If I use the power button I don't seem to have this problem.


I'm curious if anyone else has a channel B power-off pop when unplugging. Perhaps mine is defective? (Unplugging is no different that using a smart strip or power sequencer).


I do not want to have to turn this on/off manually every time I use my system. Suggestions?
Dreamliner is offline  
Sponsored Links
Advertisement
 
post #412 of 425 Old 11-04-14, 11:13 AM
Elite Shackster
 
lsiberian's Avatar
lsiberian
 
Join Date: Mar 2009
Location: Fort Worth, TX
Posts: 2,625
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Just use the power button?
lsiberian is offline  
post #413 of 425 Old 11-04-14, 01:19 PM
Shackster
 
Join Date: Oct 2014
Location: Minnesota
Posts: 9
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Quote:
Dreamliner wrote: View Post
I do not want to have to turn this on/off manually every time I use my system. Suggestions?
Quote:
lsiberian wrote: View Post
Just use the power button?
Any other ideas?

I think I saw a thread on a forum somewhere with people wiring up relays to the power button and getting turning it into a 1/8 trigger from the receiver. I think I'll end up having to go that route.
Dreamliner is offline  
 
post #414 of 425 Old 11-04-14, 06:42 PM
Senior Shackster
 
Join Date: Aug 2013
Posts: 192
Belkin PureAV Home Theater Power Console -Black https://www.amazon.com/dp/B001541R5W..._Lnwwub1GPPGEN

Im using this without problems

There is a remote connector, so, when the avr is turned on, the switched outlets are turned on too.
alfa-74 is offline  
post #415 of 425 Old 11-04-14, 06:48 PM
Shackster
 
Join Date: Oct 2014
Location: Minnesota
Posts: 9
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Quote:
alfa-74 wrote: View Post
Belkin PureAV Home Theater Power Console -Black https://www.amazon.com/dp/B001541R5W..._Lnwwub1GPPGEN

Im using this without problems

There is a remote connector, so, when the avr is turned on, the switched outlets are turned on too.
What model amp do you have? When I use a smart strip to kill power it pops. I've read it may just be the DSP models.
Dreamliner is offline  
post #416 of 425 Old 11-05-14, 12:25 AM
Senior Shackster
 
Join Date: Aug 2013
Posts: 192
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Quote:
Dreamliner wrote: View Post
What model amp do you have? When I use a smart strip to kill power it pops. I've read it may just be the DSP models.
I have the iNuke 1000 plain, no DSP (I have a miniDSP).

I just realized that you have an NU6000, so you need a lot more amperes, so, my guess is that this belkin will not work for you, although is rated to 15 amp

When I was investigating on how to turn on the iNuke with a remote I saw this:

http://www.amazon.com/Furman-MP-20Q-...=furman+outlet

This may work for you.

Regarding your pops, you may need to delay the on/off sequence for your equipment. something that I learnt is that you need to turn on first the source (AVR for example) and later, following the signal chain, the amp at the end. And the sequence for turn off is backwards, first turn off the amp and at the end the AVR.

I have this sequence on my equipment and I don't have any pop sound.

Hope this helps.
alfa-74 is offline  
post #417 of 425 Old 12-17-14, 05:47 PM
Senior Shackster
Myles
 
Join Date: Nov 2010
Location: Austin, TX
Posts: 315
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

I leave my MiniDSP on all the time. I manually turn my iNuke on/off with the power button. No pops, thumps or anything. My previous EP4K used to thump a little w/ turn-on, but not bad.

Re: Furman stuff (MP-20Q + PowerLink). Another $500 to turn the system power on/off? Does the expense sink-hole of this hobby ever end??


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
<-- SOLD!

To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.
Wooderson is offline  
post #418 of 425 Old 02-09-15, 03:01 PM
New Member
 
Join Date: Jan 2015
Posts: 1
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

I run a nu1000dsp in bridge mode. Using a 4p speakon connector(+1 and +2 connected).

What i find weird is that both volume knobs work, is this right or have I done something wrong?

Are both knobs supposed to be on the same level?
nielsvanbaal is offline  
post #419 of 425 Old 02-09-15, 04:40 PM
Shackster
Larry
 
Join Date: May 2008
Location: Cincinnati, Ohio
Posts: 41
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Quote:
nielsvanbaal wrote: View Post
I run a nu1000dsp in bridge mode. Using a 4p speakon connector(+1 and +2 connected).

What i find weird is that both volume knobs work, is this right or have I done something wrong?

Are both knobs supposed to be on the same level?
Both channels of the amp are working together in bridged mode...

Use the knob for Channel A to set your gain and rotate the knob for Channel B all the way counter-clockwise to the "OFF" position.
HomeTRNut is offline  
post #420 of 425 Old 03-10-15, 04:14 AM
New Member
 
Join Date: May 2014
Posts: 2
Re: Behringer iNUKE Class-D Amps: NU1000/NU1000DSP, NU3000/NU3000DSP, NU6000/NU6000DSP, NU4-6000

Hey there fellow bassheads, just finished reading all posts, phew.... Couldn't find the answer in here either so I thought since it's related to all inukes- here it goes.
I'm getting inuke 6000 to power my 2 SI HT 18 D2 in single sealed box. My plan is to wire each of them to 4ohms and connect single woofer to each channel. BUT. How I know that the signal is going reach each of the driver at the exact same moment so the drivers won't fight each other in a single box? I understand that the difference might be somewhere in 0.00000000001 region but still. Or am I overthinking too much about it? Thanks for any input and accept my apologies if the question was noobish :-)
NoMoneyNoHoney is offline  
Reply

Bookmarks

Tags
amps , behringer , class-d , coming , inuke

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome