Ted's LightSpace CMS Calibration Disk - Home Theater Forum and Systems - HomeTheaterShack.com

 1Likes
Reply
 
Thread Tools
post #1 of 27 Old 06-02-14, 02:12 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Ted's LightSpace CMS Calibration Disk

Hello HTS Forum users, I have released a Free Version of my calibration disk that you can use with 2 free calibration software solutions to quick measure the performance of any display.
ConnecTED is offline  
Sponsored Links
Advertisement
 
post #2 of 27 Old 06-02-14, 02:13 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Ted's LightSpace CMS Calibration Disk Free Version is a Lite Version of the Full Disk that works with the following public available free calibration software solutions:

Light Illusion's LightSpace DPS & SpectraCAL's CalMAN ColorChecker.
stefano.rissone likes this.
ConnecTED is offline  
post #3 of 27 Old 06-02-14, 02:14 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

The Free Version Download Link is including both format versions, Blu-Ray ISO and Media Files Version (MP4+MKV); This gives a wide device playback compatibility


Ted's LightSpace CMS Calibration Disk Free Version Download Instructions:

Request a Free Download Link from here.


Required Free Calibration Software Downloads:


LightSpace DPS (Display Profiling System) Free Version Download Instructions:

1) Download LightSpace CMS Demo from here.

2) Request a Free DPS Licence from here.


CalMAN ColorChecker (Free Version) Download Instructions:

Register to receive a free CalMAN ColorChecker license key by filling out the download form here.
ConnecTED is offline  
 
post #4 of 27 Old 06-14-14, 01:38 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Free Software Updates

CalMAN 5.3.0 RC4 Build: 1581 Released @ 13 June 2014

New Features

Added support for the NEW MediaForgeô On-Demand Steaming Pattern Generator

Fixed Issues

Reverted to previous SDK for the i1Pro 2 to resolved issues experienced with RC2 and RC3.

Resolved an issue that would cause CalMAN to crash when loading certain workflows.

Download CalMAN ColorChecker 5.3.5 RC4 (Build 1581)

------------------------------------------------------------------

LightSpace CMS 6.6.1.1908

A new version of LightSpace has just released.

This version includes:

-- Added new option to VideoScale

-- Additional Dolby integration added

-- Send Black to calibration patch after profiling

-- Enhanced Cube and Hybrid profiling accuracy

-- Added expanded Eizo integration for new displays

-- Fixed crash with Reference Probe selection if before active probe

DOWNLOAD LightSpace CMS Demo or Upgrade for Licensed Users

DOWNLOAD LightSpace DPS (Display Profiling System) Free Version License Request
ConnecTED is offline  
post #5 of 27 Old 07-03-14, 01:59 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

CalMAN 5.3.5 (Final Release) Build: 1597 Released @ 03 July 2014

New Features

Added support for Video Levels on the EIZO for 1D LUTs.

Added new Monitor-Direct workflow for HP DreamColor Z27x and EIZO ColorEdge monitors. This supports the internal LUTS of these monitors as well as the creation of ICC Profiles.

Changes

CalMAN now supports the JVC x5 and x6 series CMS DDC controls in native ranges.

Performance improvements were made on the Radiance for 3D LUTs

Resolved Issues

Resolved issue which caused a crash when profiling meters in Single Pass.

Download Link:

Download CalMAN 5 for Business / ColorChecker 5.3.5 (Build 1597)

Download CalMAN 5 for Home Video Calibration 5.3.5 (Build 1597)


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #6 of 27 Old 07-16-14, 08:55 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Dear disk users/friends,

I'm announcing some great news for your calibrations that will improve your measurements runs.

Tedís LightSpace CMS Calibration Disk Ė Automated Procedure for CalMAN 5 Chapters - Free Feature for All Users with Full Version or Free (Lite) Version of the Disk

As you all know from your experience of using the Version 1.1 of my calibration disk so far, the whole measuring procedure experience for CalMAN users was semi-automated since now.

CalMAN Users of the Version 1.1 of the disk had the option to select a chapter with 2 / 6 / 10 sec of display time for each patch initially, working like a pattern generator, and they only had to let that chapter sequence flow since the patches had the exact same order as CalMAN requested them... without using their Blu-Ray Player/Media Player Remote anymore... just they had to focus their eyes to their display to watch the info screens before each pattern and later to click multiple times from CalMAN the 'Single Measure' Button.

This semi-automated procedure was very helpful, as a lot of users had reported through their feedback, and made their calibration experience easier by using lower times than before by using of their player remotes.

This was bringing the user closer to 'an external pattern generator experience' but without spending a large amount of money to get any expensive external pattern generator.

The good news for all Version 1.1 disk users is that from now on this procedure will be fully automated for CalMAN software users.

There will be no need to click multiple times any buttons with their mouse anymore.

All the disk users of the Full Version of my calibration disk will be able to use all it's automated measurement features of this utility.

The users of the Free (Lite) Version will be able to run the ColorChecker Classic measurement only.

It's a nice and very useful feature to for automated measurements of your display performance without using any external pattern generator or a IR-Controller... Needs only from the user to press a key when he will see the first patch info screen to his display... after that you can leave your blu-ray remote/mouse etc... move back... and watch the color patch change and the CalMAN Charts bars & dE numbers...

How is this possible?



Intro

As you know each CalMAN Chapter starts with a 5 sec chapter info screen and after that there is a 1.5 sec pattern info announcement before each color patch to prepare for which patch you will measure.

This followed by a 0.5 sec of black frame and later you have the option to select 2/6/10 sec of displaying time for each color patch.

Tedís LightSpace CMS Calibration Disk (Version 1.1) features 3 user options for automatic pattern change: 2 / 6 / 10 sec per each color patch.

To access this you have to dial the Chapter button you see at the Chapter Info Screen using your numpad of your Blu-Ray Player, for example, to go directly to CalMAN's ColorChecker SG 2 sec. per color, you have to press '99'.

Klein Colorimeter users will be able to use 2 sec per color to measure very fast, and users of other meters (i1Display PRO, SpectraCAL's C6, XRite's i1PRO1/2, BasicColor Discus) will had the option of 6 or 10 sec of displaying of each Patch.

Procedure

CalMAN 5 has some keyboard shortcuts for quick meter or slider actions.

For example, the F5 keyboard button takes a single measurement and with the AutoAdvance option enabled from your Source Settings in CalMAN the slider will select the next color automatically after each measurement.

We are using a Batch file that you have to run and initially select what Chapter you want to use.

For example, to select ColorChecker SG (96 Color Patches) you have to input ď10Ē and hit the Enter Button and after you see on your display the first patch.

You have only to press a keyboard key and that Batch file will send all the required timed commands without any other user prompt.

Now you will be able to use long measurement runs like 10-Step Saturation or ColorChecker SG automatically.

Using Tedís LightSpace CMS Calibration Disk 1.1 you need only select the Chapter you want to measure using your Player Remote and when you see the first patch to your display to press a key from the batch utility.

All the required measurements will be automated.

That Batch file contains a series of DOS commands that do the required tasks for this automated procedure.

We are using the WinSendKeys utility to send the keyboard shortcut commands.

This is the list of the Batch files that are included:



NOTE: Don't rename that 6 Batch files because they will not work later. You can change the folder name or create shortcuts with custom names of you like.

Pre-Automated Procedure Testing

Before using any Automated Batch file you have to measure the Chapter in which you are interested to see which Chapter of 2/6/10 sec. patch display time works without problems with your current display/meter setup.

Try to take the measurements the semi-automated way as you were doing previously.

For example, use the 6 sec per patch chapter to see if any measurement takes more than 6 sec. time to return results.

If this is happening with your current meter settings, it will break the sync of the automated measurements.

Try to reduce the exposure setting and this will reduce the required time your meter will need to read each patch.

For SpectraCAL C6 users Itís recommended to use a fixed exposure time setting and not x Sample setting because low luminance patches will require more time and will break the sequence when you read a Black Patch or generally dark patches like 5/10% Gray or 5/10/15% Luminance etc.

In some cases the C6 will take about 15/20 sec to read black etc.



If you want to skip the black patch reading from the automated measurement procedure, we have created batch files to skip from all available chapters the Black patch measurement in case you want to manually enter your Black level luminance (cd/m2) into CalMANís Workflow Advanced Options or in case you take this measurement manually.

X-Rite i1Display PRO (i1d3) / SpectraCAL C6, i1PRO1/2 or Discus meters will be able to use the 6 or 10 sec. per color patch Chapter & Batch file.

Klein users will have no problem using the 2 sec. per color patch Chapter & Batch file.

CalMAN Pre-Automated Procedure Setup



Open CalMANís Settings Panel and check that you have enabled the Keyboard Shortcuts.



Itís optimum to set the pattern delay 0, or 0.5 sec.

It has to do with each display and needs some testing to find which delay works better in your setup.

If you will use Tedís CalMANís 5 Verify Calibration Tools Workflow or any other, open the Source Settings Panel and check that the Auto Advance is checked.

Using Virtual Meter you can check if your Keyboard F5 button is taking measurements.

Simply select a color from your CalMAN slider and press F5 to see if itís measuring and if it is going to the next color slider.

If by pressing F5 nothing happens the automated procedure will not work and you need to re-check your settings.

Start Automated Procedure Batch File

Once you have decided and tested manually which sec. per color chapter you can use with your current display/meter setup settings, locate the Batch files folder and double click to run the batch file or your selection.

When you double click the Batch file for the first time, a Security Warning will pop-up. You can un-tick the radio button if you want this warning to not be displayed in the future.



This is the Batch File Main Screen.



Here you can input your number for the chapter you want to use and press the ĎEnterí key to continue.

The Batch file will now wait...



Navigate the disk menu or locate the media file... Using your Player Remote, select the Chapter from the CalMAN Session of the disk you want to measure...

Check that you have CalMAN Window Opened on your desktop and itís not minimized on your taskbar.

Select from the CalMAN Slider the color patch that the Batch file is asking for before continuing.

After selecting the required Chapter from Tedís LightSpace CMS Calibration Disk -> From CalMAN Session, you will see the initial Chapter Info Screen... after that screen when you will see the first color patch info screen to your display press a key from your keyboard... and let it flow...

After the end of the measurements, the Batch file it will return to it's main menu for you to select a new measurement if you like.



If you do all the steps correctly and the automated procedure measurements hasnít started, re-run the Batch file and by right clicking select ĎRun as administratorí command.

Download Instructions

All Ted's LightSpace CMS Calibration Disk users of Full Version or Free (Lite Version) will get by email all the above instructions and the Download Link of the Batch Files to their e-mail address.

We have tested these Batch Files using Klein K-10A, i1Display PRO, iPRO1/2 meters without any problem. Just remember that if the semi/automated procedure works for you, then the Fully Automated will work also. Try first to find which one of 2/6/10 sec. per color patch Chapter works to your setup and later move to that Batch Files Automated measurement way.

These Batch files are using MS-DOS commands and they have tested and work to Windows XP, 7, 8 by us so far.

If you have any question of problem, please contact me.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #7 of 27 Old 08-03-14, 08:53 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Hello, I'm posting some extra and more detailed instructions for the CalMAN 5 Automated Measurement Utility below.

For Example, If you want to measure 5-Point Saturation using the Automated Procedure Measurements Utility, follow these steps:

1) Run the Batch file (2 / 6 / 10sec.), you will see the following screen: *(I will use the 2 sec. Batch file for that example)



2) Press '4' key and then 'Enter' key from your keyboard; you will see the following screen:



3) It will asks you to open your CalMAN 5 workflow payout page where the 5-Point Saturation layout page is located, for example in case you will use the exculsive CalMAN 5 workflow I send to my disk users, go to that page below and click to select the Black Patch from the CalMAN's Slider: (you can use any other custom or CalMAN 5 workflow you like that is configured for 5-Step Saturation measurements)



4) While the CalMAN 5 window is opened to your background select from your windows taskbar the Batch File Window and this will bring the Batch File window in front of CalMAN window (the Batch file is waiting for a keyboard key to be pressed to start the Automated Measurements procedure)...like the screen below:



5) Now using your Blu-Ray Remote go and select the 5-Point Saturation Chapter from Blu-Ray Disk Menu screen of CalMAN Chapters / or locate and select the file in case you are using the Media Files Version of my disk:



6) You will see that initial Chapter Info Screen for 5 sec....*(as I used for that example the 2 sec. per patch chapter, press '35' from your Blu-Ray Remote to use the 2.sec per patch chapter).... and get ready to press the keyboard key:



7) When you will see the first frame of the first pattern info screen (see screenshot below), press immediately a keyboard key:



8) After pressing the key the Automated Measurement Procedure for CalMAN 5 will start, the Batch File window will be minimized and your CalMAN 5 window will be stay in front; like the screen below:



9) There no other user input required until the end of that 5-Step Saturation measurements, just stay back and watch the experience of how simple and very useful this feature is... it's like using an external pattern generator to generate the patterns for you, and the most important is that you are calibrating using your actual movie playback source, because external pattern generators can't see / ingore your source output errors.

You can use CalMAN's virtual meter to do a quick testing before preparing your meters for real measurements.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #8 of 27 Old 09-06-14, 04:26 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk



Verify x-Point Saturation using Quick Analysis Workflow with Ted's LightSpace CMS Calibration Disk:

For 4-Point Saturation / 100% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 100 and set Saturation Sweeps to 25% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

For 4-Point Saturation / 75% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 75 and set Saturation Sweeps to 25% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

For 5-Point Saturation / 100% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 100 and set Saturation Sweeps to 20% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

For 5-Point Saturation / 75% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 75 and set Saturation Sweeps to 20% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

For 10-Point Saturation / 100% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 100 and set Saturation Sweeps to 10% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

For 10-Point Saturation / 75% Stimulus Level: Go to Saturation Sweep layout page, Change the Stimulus Level to 75 and set Saturation Sweeps to 10% Sweeps. About all other settings of the Layout page it doesn't matter where they are. Go to Workflow Advanced Options and un-tick the Saturation targets use constant luminance.

Verify x-Point Luminance using Quick Analysis Workflow with Ted's LightSpace CMS Calibration Disk:

For 4-Point Luminance: Go to Luminance Sweep layout page, set Gamut Ramp Points to 4-Point 25% Step 25-100%. About all other settings of the Layout page it doesn't matter where they are. (Workflow Advanced Options - saturation targets use constant luminance...doesn't matter if ticked or un-ticked... Stimulus Level value is not interacting that layout page also.)

For 5-Point Luminance: Go to Luminance Sweep layout page, set Gamut Ramp Points to 5-Point 20% Step 20-100%. About all other settings of the Layout page it doesn't matter where they are. (Workflow Advanced Options - saturation targets use constant luminance...doesn't matter if ticked or un-ticked... Stimulus Level value is not interacting that layout page also.)

For 10-Point Luminance: Go to Luminance Sweep layout page, set Gamut Ramp Points to 10-Point 10% Step 10-100%. About all other settings of the Layout page it doesn't matter where they are. (Workflow Advanced Options - saturation targets use constant luminance...doesn't matter if ticked or un-ticked... Stimulus Level value is not interacting that layout page also.)


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO

Last edited by ConnecTED; 09-06-14 at 04:09 PM.
ConnecTED is offline  
post #9 of 27 Old 09-16-14, 04:20 AM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Hello, I have just uploaded a new webpage with a lot of detailed instructions about the available Measurement Solutions for Ted's LightSpace CMS Calibration Disk users.

These instructions are helpful the for Free Version or Full Version of the disk users.

There a lot of picture examples and text instructions that makes pretty difficult to post all these instructions here, so you have to visit that page:

Measurement Solutions for CalMAN/ChromaPure users using Ted's LightSpace CMS Calibration Disk

The Measurement Solutions page is covering the following topics:

1) Importance of calibrating from the actual movie playback source.

2) Semi-Automated Measurements for CalMAN users with details and instructions.

3) Semi-Automated Measurements for ChromaPure users with details and instructions.

4) Automated Measurements Procedure for CalMAN users details, instructions, very detailed example about how the Batch Utility files are working with CalMAN and other notes.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
post #10 of 27 Old 10-01-14, 03:38 PM Thread Starter
Senior Shackster
 
ConnecTED's Avatar
 
Join Date: Jan 2011
Location: Athens, Greece
Posts: 309
Re: Ted's LightSpace CMS Calibration Disk

Note for OPPO Blu-Ray Player Users

Lately some OPPO Blu-Ray Players users have asked me about any compatibility / playback issues or my calibration disk with Blu-Ray Player models where the latest OPPO firmware have been installed.

As you probably know, OPPO has decided to not allow any Blu-Ray ISO or Blu-Ray Structure Folders playback from USB of their players that are running the latest firmware.

For current disk users or future disk users with OPPO players there is a small utility that modifies the Blu-Ray Folders and make possible the playback of the Blu-Ray ISO from the OPPO's USB.

Here you can download that small Utility: http://www.displaycalibrations.com/f...Modify_1.4.rar

The modification of the Ted’s LightSpace CMS Calibration Disk Version 1.1 Blu-Ray ISO using that tool has been tested so far with success and the playback from the USB works to the following models:

OPPO BDP-103
OPPO BDP-103D
OPPO BDP-105D

If someone want to test to a different model to see if it works, there an ISO of the Free (Lite) Version available to anyone that will request the Ted's LightSpace CMS Calibration Disk (Free Version) Download Link from here: http://www.displaycalibrations.com/r..._download.html


To view links or images in signatures your post count must be 10 or greater. You currently have 0 signatures.


Software: LightSpace CMS, SpaceMan ICC, SpaceMatch DCM, CalMAN 5, CalMAN RGB, ChromaPure, ControlCAL
Video Processors: eeColor 3D LUT Box, Darbee DVP-5000 - Pattern Generator: DVDO AVLab TPG
Meters: JETI Specbos 1211, Klein K-10A, i1PRO2, i1PRO, SpectraCAL C6, i1Display PRO, Chroma 5 PRO
ConnecTED is offline  
Reply

Bookmarks

Tags
calibration , cms , disk , lightspace , ted

Quick Reply
Message:
Options

Register Now




PLEASE COMPLETE ALL REQUIRED FIELDS BELOW... THANKS!

REQUIRED FIELDS ON THIS PAGE
YOU MUST COMPLETE ALL OF THESE

Username
Password
Confirm Password
Email Address
Confirm Email Address
Random Question
Random Question #2




User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
PLEASE READ BELOW PRIOR TO ENTERING AN EMAIL ADDRESS!

ATTENTION!

YOU MUST ACTIVATE YOUR ACCOUNT!

Activation requires you reply to an email we will send you after you register... if you do not reply to this email, you will not be able to view certain areas of the forum or certain images... nor will you be able download software.

AN INVALID EMAIL ADDRESS WILL CAUSE YOUR ACCOUNT TO BE DELETED!

See our banned email list here: Banned Email List

We DO NOT respond to spamcop, boxtrapper and spamblocker emails... please add @hometheatershack DOT com to your whitelist prior to registering or you will get nowhere on your registration.


Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML is not allowed!
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

 


For the best viewing experience please update your browser to Google Chrome